those with aftermarket rear control arms

ONEBADPNY · Dec 14, 2003

i bought a set from d&d motorsport and they do not have a grease fitting on them. everytime it is cold outside they squeak. can i add them to the upper and lowers without taking them out of the car? i think the squeaking is from the bushing onto the frame/brakets on the car so maybe they would not help this.

ponyboy19 · Dec 14, 2003

did you you put any grease on the outer edges of the bushings when you slipped them in? I probably wouldn't worry about it much since polyurathane bushings are a bit noiser anyways. as far as putting grease zerks on the arm itself i would remove the bushings then drill and tap a whole an screw in a zerk. then reinsert the bushings. Not sure if the grease would squeeze out to lube the outer edge or not?

those with aftermarket rear control arms

ONEBADPNY

New Member

ponyboy19

Similar threads

those with aftermarket rear control arms

ONEBADPNY

New Member

ponyboy19

Similar threads

Privacy & Transparency

Privacy & Transparency