Those with C&L MAF...opinions wanted.

[87ttopstang]

Hey guys, just considering my options for my new MAF. I am supercharging the stang and need to go with 42lb injectors and a 80mm MAF. I was looking for a PRO-M as I have had good luck with my 75mm, but the C&L units seem to be a little cheaper. I found a nice package deal through Blue Oval Industries.

http://cgi.ebay.com/ebaymotors/86-93-Mustang-42-lb-Injectors-80mm-C-L-Mass-Air-Meter_W0QQcmdZViewItemQQcategoryZ33553QQihZ016QQitemZ260028914434QQrdZ1

Just looking for opinions from anyone running a C&L MAF?

Thanks.

 

[Marlboro_Man]

I've had no problems with my c&l. As for Blue Oval Indusries, I got my control arms from them and they are a nice piece but they took almost a full month to ship them to me.

 

[afast93stang]

I have a C&L MAF 76mm calibrated for 19lb injectors, I got it about a year ago and havnt had any problems with it.

 

[92GreenGT]

Just get the new company thats taken care of Pro-M's business to recal the meter you have now.

As for the original question, I run a C&L meter for #42's on my junker right now and it runs pretty good. Hope this helps.

-Dave

 

[Foxfan88]

my 73 mm vortech/C&L unit works great, i have the 19# sample tube.

people complain about the C&Ls and i didnt find a problem.

 

[795.0pacecar]

Just send your 75mm back to pro-m to be recalibrated like what was suggested above. Here is the site for their new buisness. http://www.massairsystems.com/

 

[MYSTICSVT]

No problems here. Works great. Mods in sig.

 

[88_GT_5_oh]

i ran a C&L N/A for about a year and a half. no problems at all

i have since upgraded due to the turbo

 

[Strype]

Love mine!

 

[89LXRAGTOP]

73mm here, and no problems at all in the 4 years I've had it!

 

[fastimes69]

Me and a number of other people I know have had a C&L for years and not one problem.

 

[a885.0]

I also have a c&l 76mm with the mods in my sig and no problems here

 

[87ttopstang]

Thanks for the replies guys. Think I go that route as the new ProM company wants $200 to recal my 75mm.

For $450 I can have the C&L and the injectors.

 

[Flavadave4]

Cant wait to see the car next year with the charger on it........damn you! getting all the trophys at Carlisle!
Next time you see my car it will have the new H/C/I, 5 lug convo with big brakes and 10th Annaversary Cobra Wheels but it still will not be even close to your car!

 

[87ttopstang]

Cant wait to see the car next year with the charger on it........damn you! getting all the trophys at Carlisle!
Next time you see my car it will have the new H/C/I, 5 lug convo with big brakes and 10th Annaversary Cobra Wheels but it still will not be even close to your car!

Looking forward to the drive down again this year. We will have to have a little fun

What brakes you going with?

 

[RS200]

Had an 80mm C&L cal'd for 30lb injectors. Ran like garbage, called them up to get the transfer function to fix it (twEECer), and they say "we never made one for that application. Here, buy some more stuff". No thanks...sold it shortly after.

 

[Flavadave4]

Looking forward to the drive down again this year. We will have to have a little fun

What brakes you going with?

I am going to do the JY SN-95 swap for the axels and spindles......I'll have to see what i can find for Calipers, 2 piston PBR Cobras are what i am wanting to get!


Might depend on what i can find, the local salvage yard has all the axels, spindles and other stuff i will be using. They have this thing called the pull-a-thon.........what ever you can carry out on you for $15!
I can't wait till they have the next one!