Throwout bearing = tweety bird

G

grrrrrrr

New Member

May 20, 2003

289

0

0

norfolk, VA

May 9, 2005

#1

• May 9, 2005

• #1

Throwout bearing is starting to squeak... why is it doing that, is it going to be expensive and will something eventually break?

 

S

slytherin

New Member

Apr 5, 2004

702

1

0

northeast ohio

May 9, 2005

#2

• May 9, 2005

• #2

If it's still your T5 its probably your bearing retainer you can get the HD one from D&D for $50 I believe and that should cure the chirps.

 

G

grrrrrrr

New Member

May 20, 2003

289

0

0

norfolk, VA

May 9, 2005

#3

• May 9, 2005

• #3

Can I put it in myself or do I have to seperate the engine and transmission?

 

M

mr.b

Founding Member

Aug 30, 2002

214

0

0

May 9, 2005

#4

• May 9, 2005

• #4

transmission has to come out. mine is squeaking also, just been putting off the trans removal. Good thing the garage has ac, because 85 degree temps don't get me excited to get underneath the car!

 

Hef5.0weisen

20+ Year Stangneter

Mar 5, 2004

574

4

28

NorthWest Florida

May 9, 2005

#5

• May 9, 2005

• #5

don't underestimate yourself, swapping a TOB isn't that hard. You can probably buy the tools and have them around for the amount labor would cost (assuming you don't have em). Pick up a Haynes manual, read up on 5-spd removal, then go for it

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

May 9, 2005

#6

• May 9, 2005

• #6

Can't you do the TOB with just basic hand tools, some time and a buddy?

 

mo_dingo

20+ Year Stangneter

Aug 26, 2003

3,031

2

58

Tucson, AZ

May 9, 2005

#7

• May 9, 2005

• #7

94-302-vert said:

Can't you do the TOB with just basic hand tools, some time and a buddy?

Click to expand...

Full set of sockets and long extensions, 12pt 12mm socket, trans fluid w/ a funnel and hose, good floor jack with a wide cup to stabilize the trans, and you are set...

Scott

 

JJ95GTID

Active Member

Sep 22, 2003

1,141

4

49

Phoenix, AZ

May 9, 2005

#8

• May 9, 2005

• #8

I tranny jack from Harbor Freight is cheap and well worth it. As for doing the TOB it is a piece of cake. The tranny empty is pretty light (<75lbs). If your clutch is acting up now is a good time to that as well. Will only take up another 20min or so while you got the tranny on the ground.

 

G

grrrrrrr

New Member

May 20, 2003

289

0

0

norfolk, VA

May 10, 2005

#9

• May 10, 2005

• #9

My clutch is working fine. How long with the part hold up before it fails and grounds my car?

 

JJ95GTID

Active Member

Sep 22, 2003

1,141

4

49

Phoenix, AZ

May 10, 2005

#10

• May 10, 2005

• #10

grrrrrrr said:

My clutch is working fine. How long with the part hold up before it fails and grounds my car?

Click to expand...

Don't know for sure. Does it only make noise when there is no pressure on the clutch pedal? Mine made noise like that for several months before I decided to just do the swap. I wanted a better clutch too. So, I went ahead and bought the FRPP King Cobra clutch kit. It comes with a TOB so I solved two problems with one purchase.

 

Zero Signal

Active Member

Feb 24, 2003

2,633

2

46

Tucson, AZ

May 10, 2005

#11

• May 10, 2005

• #11

Listen to mo_dingo, he's magicly resourceful.