Throwout bearing??

95CobraStang · Nov 28, 2004

My girlfriend's friend's car has a little prob with the throwout bearing on her stang. How much should she expect to pay to get a new one swapped in there? I was thinking no more than $200 b/c I had my whole clutch installed for $250 a while back.

She was quoted at around $1000 for it. Is it me, or are they about to give the royal f#$king?? Maybe I am missing something here though .

Another question: Doesn't a new clutch usually come with a throwout bearing?

BossShinoda9701 · Nov 28, 2004

Wow 1k do you get a kiss with that also??

I would say around $500 since you have to drop exhaust, complete driveline, and clutch, depending on the mechanic. The throwout bearing itself only cost $20.

Only the clutch and alignment tool comes in the kit, you have to buy the throwout bearing seperate.

Is there just making a squeling noise or what?

CanadaStang · Nov 28, 2004

Are you sure it's the throw out bearing? [when you push the clutch all the way in, does it make a nasty rumbling noise? If it is, it would wise to change the clutch and pressure plate while the tranny's out.

95CobraStang · Nov 28, 2004

CanadaStang said:
Are you sure it's the throw out bearing? [when you push the clutch all the way in, does it make a nasty rumbling noise? If it is, it would wise to change the clutch and pressure plate while the tranny's out.

I haven't heard it, myself...ill give it a listen and drive, but yeah i agree...while it's out, i think a new clutch is in the mix too.

95CobraStang · Nov 28, 2004

BossShinoda9701 said:
Wow 1k do you get a kiss with that also??

I would say around $500 since you have to drop exhaust, complete driveline, and clutch, depending on the mechanic. The throwout bearing itself only cost $20.

Only the clutch and alignment tool comes in the kit, you have to buy the throwout bearing seperate.

Is there just making a squeling noise or what?

it's kinda a grinding..shaking..noise. it's a low pitch (this is what im told) if you push on the clutch a little, i guess it goes away. i might have her see my mechanic, cause hers sounds like a crook

Throwout bearing??

95CobraStang

Member

BossShinoda9701

New Member

CanadaStang

New Member

95CobraStang

Member

95CobraStang

Member

Similar threads

Throwout bearing??

95CobraStang

Member

BossShinoda9701

New Member

CanadaStang

New Member

95CobraStang

Member

95CobraStang

Member

Similar threads

Privacy & Transparency

Privacy & Transparency