• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Thumper E7s or GT40p?

  • Thread starter Thread starter dstang01
  • Start date Start date Aug 31, 2007
Prev
  • 1
  • 2
First Prev 2 of 2
D

dstang01

Member
Sep 22, 2005
170
0
16
Vancouver, BC
Sep 5, 2007
#21
  • Sep 5, 2007
  • #21
Pod said:
That's almost exactly what I'm doing over the winter. Mine will still be speed density, but every other part is what I've got.
Click to expand...

good stuff man, let me know how it works out (if I havent done it yet myself )

Ive been doing more research, and I like how thumpers head is basically bolt it on and go, no screwing around. Im sure you could find a good gt40p for cheaper and bolt it on, but if theres anything wrong with the hardware in the head your in trouble. I guess I just like the security of thumpers package, knowing its been well worked and has no defects.

If anyone has more opinions or experiences to add please dont hesitate
 

thumper460

Founding Member
Jul 24, 2000
3,022
2
56
Orange Park , Fl
Sep 6, 2007
#22
  • Sep 6, 2007
  • #22
Getting the GT40s for 200-250 from the yard off an explore IS the future!! Then bolt them on your car and find out WHY the explore was there in the first place!! OK, take then to a shop!! Clean/ mag for cracks 30.00 / stock valve job $95.00/ valve seals 16-19.00/ spring shims for STOCK springs.. 16-30.00 / surface flat 60-80.00 !! Now you have a NON PORTED Gt40 P!! Great!! ready for the car!! And there is a 420.00 Bill!! But you want them "Ported?? Performance Valve job, springs keepers and retainers to carry the cam you are going to run... well lets look at that!! Using an average GOOD machine shop that ports heads. Exhaust ported ( not gasket matched and blended )- Intake ported ( not gasket matched) deep bowl work , reshaping the intake boss for better flow, then the performance valve job... and you are ruffly at 750-800.00 ( call around!!) New springs/ moly retainers/ keepers/ performance seals/ $ 185.00-195.00 NOW we are getting a real close idea of a ported Head cost ( Not gasketmatched and smoothed) ... and you are ruffly in at 935.00 !!!



SOOoooo.... come on!! home porting is great and the best way to learn, and it is your own ****!! all done by your own hands!! that is great!! But a set that has years.. and years.. of experiance/ flow bench time/ drag racing and engine builds.. is going to be equal???

For the price you are getting all the above!!! it is a bolt on ready head for that 695.00 !! there are a bazillion 12 sec cars or 450+WHP boosted cars out there !! It is a 100% realistic price and huge performance gains for the cost!! HUGE!! and most of the time the shipping of the heads is LESS than 1/2 the full cost!!

SOOOoooo.... yes, you will see a great gain by bolting on the 40's however .. when you get them worked.. the gains are even MORE!! The average N/A gain OVER THE Original gains from the heads, after ported is 30-45 MORE WHP!! SOOooo.. is it worth it?? HMMMMMmmmmmmm...........

Just me..............................................

Thumper
 

Attachments

  • GT40P grey.webp
    43.9 KB · Views: 226
  • GT40P int exh 2.webp
    41.2 KB · Views: 170
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 6, 2007
#23
  • Sep 6, 2007
  • #23
The scenario above would be a last ditch scenario. I've never had problems finding shops/friends or what have you that will give a great deal on labor.

30-45 HP gain is a significant number, and coming in when all is said and done at the $600-700 price tag for a set of gt40's is completely reasonable.

I've had great luck with explorer engines. They're low mile, and it's a 5.0. The 5.0 Motors are bullit proof. Many explorers hit the yard because of a rollover, or because something else failed on the truck and NOT the motor. In fact, of all the explorer motor swaps i've personally heard of (or the two i've done), I've yet to hear of someone getting a bad motor, or one that needed headwork.

I'm not flaming here, and certainly not you, as you seem to have quite a legendary reputation. However, we're now living in 2007, and todays slightly above average import is putting out 250-300 hp. Hell, Nissan's entire lineup pretty much makes 285-300 hp. The era of the e7 head is gone. Hell, even fully ported gt40's will barely make enough power to keep up with today's modern mustangs and import's.

You've got brand new mustangs spinning mid 13's bone stock, you've got 350z's hitting hi 13's all day long, with the evo, wrx, and rx7 all in the same area. Even some of your basic 4 cylinder hondas are making some outrageous numbers nowaday's. Your average stock fox mustang does mid to hi 15's in the quarter, with the best of the best and the damn good drivers squeezing 14's out of a stocker. The setup you sell will do mid 13's with full bolt ons, with the best of the best hardcore mustang drivers pulling off a late 12, which is a percent or two or three at best of the guys who own mustangs.

our poor outdated 5.0 motors are getting outdated in a hurry. Even GM is able to put out a N/A pushrod smallblock ls2 making 440 hp STOCK.

For this reason a 260-300 hp 5.0 motor isn't good for much nowadays except for keeping up with a stock wrx or 350z. I spent a good amount of money on my gt40p explorer motor swap (unported) with FULL bolt ons, and was rewarded shortly after with a victory against a brand spanking new 350z by a carlength or two. Shortly after that, I realized all my work was nearly for nothing, as I'm just as quick as any modern car now, and not any quicker.

my .02
 

thumper460

Founding Member
Jul 24, 2000
3,022
2
56
Orange Park , Fl
Sep 6, 2007
#24
  • Sep 6, 2007
  • #24
Yep!! your right on!! the 4 valve per cylinder hemi head DOHC 4 cyl are scary, my 1.6 supercharged 4V SOHC will run 135 and do 14.50 qtr mile times !! and when I see the cars Tony G is putting out of his shop ( HP Performance ) 500 wheel HP in the new Mustangs, 400+ trucks.. blowers and turbos are the future.. and surely are out in numbers!! That being said.. how many gearheads can have a shot at Joe's 1000+ wheel HP Ford GT ( twin turbo) or a Cobra / GT DOHC blown engine?? Not many!! yes?

Thus... the ported heads vs the 1000.00 aftermarket heads, the OTS cams vs the custom grinds, the 14 sec car vs the 12 sec cars.. it is all the best money for the dollar spent!! yes?? It is 2007 !! and I dont really worry about that front wheel small tire run from a roll *** stuff!! Yes they are fast.. and yes they are EXPENSIVE!! and all I can say , is Great!! Now how can I help the poor guy that has a set of duals, tired rubber, wife, kids and a dream?? IF they have realistic HP dreams, and the amount of money to spend... then those are the guys I am out to help!! Is port work out of date?? al the CnC stuff out there.. I can make THOSE heads faster with hand massage and work!! NO we arent talking the 3000.00 worth of welding . epoxy in the runners... just down where the average guy can pull 290-320 HP at the wheels, and having fun doing it!! cool?? and yes your are right!!

Just me.........................................

Thumper

PS.. cars have gone from 15 sec to 13 sec and now 12 sec dailey dual purpose cars, in my life time, and we do talk about the poor guy that brings out his boosted 500+ WHP mustangs... but there is only one or two of those guys out!! all the rest are the average sat nite parking lot guys!! TO say that the 5.0 and a 12 sec car is out of date, is a sorry statement, the same ones we used to say for over 35 years when the new power came out!! Emagine the 426 Hemi's or the 429 SCJ or SOHC , 427 trip carbs.. 396's .. blah blah.. they were all in the next dearship.. and guess what.. the performance on the streets is STILL the 13- 12 sec cars being 80% of the make up!! The 20% of the top guys.. dont have the inner fun , that a hands on wrenched 12 sec car has.. or at least maybe the same... to buy all the power in a car from the dealer is FAST!! Yep!! but when he gets his doors handed to him by a long hair grease monkey!! Guess what people remember about that race!! Yep!! the grease monkey!! LOL

Tpr
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 6, 2007
#25
  • Sep 6, 2007
  • #25
My love is being the grease monkey in beat looking 86 mustang that can hand out a good beating to any 13 second new car out there. There indeed is a lot of satisfaction in that.
 

thumper460

Founding Member
Jul 24, 2000
3,022
2
56
Orange Park , Fl
Sep 6, 2007
#26
  • Sep 6, 2007
  • #26
You Da man!! Fun Huh!! LOL

Thanks

Thumper
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Progress Thread BluePrint 347 long block engine swap
  • Sparky714
  • Aug 2, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 7 8 9
Replies
163
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 8, 2026
Sparky714
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
3
Views
2K
SN95 Mustangs For Sale (1994-04) Aug 17, 2026
Labora
Anyone have a AFR185 "Enforcer" and Explorer intake combo?
  • reddy351
  • Jan 20, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 2, 2023
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?