• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Thursday 11.20.03

  • Thread starter Thread starter JerseyGT
  • Start date Start date Dec 4, 2003
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Dec 4, 2003
#1
  • Dec 4, 2003
  • #1
thursday night bout 7:00pm I was on my way to jspecmgte house. Well I reach mantua right near "hello gorgeous" and I rear ended some guy doin bout 45-50mph, I just got a couple cuts on my head and a pretty big cut on my nuckle on my right hand that has 11 stiches. My car suffered a blow to the front pushing the radiator to the engine, from what I saw the engine looked ok from up top no oil leaks just anti freeze. the windshield is cracked from where my head hit. the steering wheel is dented, the driver side qrtr panel in crimped causing my door to have to be forced open. The guy at TMT said from what he saw I'd spend alot trying to fix it and might as well strip the car and the throw everything on a diff stang. So I didn't get home till bout 1am and now I'm car less, got a headache and can't move my right hand that well do to the stiches. oh and a banged up elbow. R.I.P. to the Blue Beast. born 1991 died 11-20-03 She will be missed. Here is the link to my site. The pics are a lil big but I tryed shrinking them I'll fix them again at a later time. check them out.
 
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Dec 4, 2003
#2
  • Dec 4, 2003
  • #2
Heres the pictures, http://vipergtsr.freeyellow.com/aroundtown2.html
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Dec 4, 2003
#3
  • Dec 4, 2003
  • #3
Very sorry to hear about your misfortune.

I would start taking the car apart (to use parts again or sell them) as soon as possible, some bent parts will come back into place if you remove them from the car soon enough.

How did you end up rear-ending someone? Freak accident or what?
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Dec 4, 2003
#4
  • Dec 4, 2003
  • #4
How come the air bag didn't deploy??
 

Black331Stang

Active Member
Apr 29, 2003
1,485
0
36
Long Island, NY
Dec 4, 2003
#5
  • Dec 4, 2003
  • #5
sorry to hear about the accident hope u are ok...and how did u hit them at 50 mph? but i must say at 45 mph that front end held up pretty damn good! it doesnt look THAT terrible unless frame problems
 
M

Mustang Ricky

New Member
Mar 18, 2003
102
0
0
Maryland
Dec 4, 2003
#6
  • Dec 4, 2003
  • #6
if your head hit the windshield, you should try wearing seat belts. at least then you wouldn't have to replace the windshield and you wouldn't have a headache. consider yourself lucky.
 
J

JerseyGT

New Member
Jan 26, 2002
32
0
0
South NJ
Dec 4, 2003
#7
  • Dec 4, 2003
  • #7
Mustang Ricky said:
if your head hit the windshield, you should try wearing seat belts. at least then you wouldn't have to replace the windshield and you wouldn't have a headache. consider yourself lucky.
Click to expand...


Yea alot of people have told me that. Thanks for all of your concern. Besides the car I got a 10 stitch cut below my middle finger on my right hand so thats the worst that happend, luckily. Uh, in the pictures on my site on the second piture that shows my front bumper there a 89 GT with a white front bumper up in the right, thats the new beast. As far as damage goes, I would need a windshield, driver side fender, a radiator support, a bumper, the lights, a radiator, a hood, elec fan, paint, and a water pump (bent spindle). The roof was already f*d up cause the hood flew off back in may. So my friend wanted to fix that up. I was looking at the financial situation I'm in and how quick I can get her back. The cheapest and quickest is to just swap everything to the 89 GT. So thats what were doing. I'll let you guys now how she comes. l8r Jeff
 
You must log in or register to reply here.

Similar threads

D
Will 2023 (Non-Handling Pack) Mach 1 Wheels Fit A 2013 Mustang GT OK?
  • dmw_4814
  • Oct 27, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
120
2010 - 2014 Specific Tech Oct 27, 2026
dmw_4814
D
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
331
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
146
Off-Topic Hangout Jul 20, 2026
SchwarzStock
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
482
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?