• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Ticking in intake and backfiring after HG change.

  • Thread starter Thread starter Fastcat
  • Start date Start date Aug 9, 2004
F

Fastcat

Founding Member
Mar 5, 2002
582
0
0
St. Louis
Aug 9, 2004
#1
  • Aug 9, 2004
  • #1
I finally put my engine back together and now there is a ticking noise (louder than my exhaust) coming from the intake. And the engine has no power and it backfires through the intake when I hit the gas. The ticking almost sounds like a ping... like in a coffee can. Ive played with my timing, put 93 octane gas in the car, checked and double checked my firing order, and checked for vac leaks. and the ticking isnt constant w/ the rpms either... I can hold the engine at 2k rpms and the ticking wont get faster or louder in intensity. I didnt put my original intake back on either. Before the HG change I had a stock intake on and now I have my ported one on. My friend told me it could be an injector, what do you guys think?
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
Aug 9, 2004
#2
  • Aug 9, 2004
  • #2
check and see if there is a busted rocker arm bolt, mine did that once and kinda sounded like that. sputerd and soft on power.

also is your dis. in right? might not have been on the comp. stroke and its off.

any valve work?/ what heads are you running maybe they are shaved to much or the heads have to big of valves.
 
F

Fastcat

Founding Member
Mar 5, 2002
582
0
0
St. Louis
Aug 9, 2004
#3
  • Aug 9, 2004
  • #3
Dis. is in right, I put it in the exact same position that I took it out of and the timing is at 14*. The ehads are stock w/ no valve work
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
Aug 9, 2004
#4
  • Aug 9, 2004
  • #4
I would start with the rockers, did you get them set right the proper way, getting them trqed down in 1/4-1/2 turn getting the 20-25ftlbs (I think this is the trq spec.?)? If not your rockers may be loose. does it sound like marbles rolling around in the intake? thats what mine sounded like when a rocker bolt broke the rocker was tapping the top of the vavlecover and the other side bent a pushrod making another rocker tap as well.

have you run if a few min. to get the lifters pumped up?

If its not timing, not vac., then my first guess would be valve adj. and its not that hard to remove a valve cover esp. since the gaskets are reuseable.
 
You must log in or register to reply here.

Similar threads

9
Unknown engine tick
  • 94 Daily
  • Oct 31, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
161
1994 - 1995 Specific Tech Nov 1, 2025
91AOD5.0LX
  • Locked
Engine Help timing possibly
  • K1tha1
  • Apr 26, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
237
Fox 5.0 Mustang Tech Apr 26, 2025
Noobz347
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
705
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
267
Other Auto Tech Jul 13, 2026
General karthief
N
Edelbrock 1405 Setup
  • nathantaylor200
  • Nov 4, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
245
Classic Mustang Specific Tech Nov 5, 2025
nathantaylor200
N
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?