• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

time seems slow

  • Thread starter Thread starter 87pony
  • Start date Start date May 17, 2005
8

87pony

Member
Oct 14, 2004
69
0
6
May 17, 2005
#1
  • May 17, 2005
  • #1
alright guys i went to the track for the first time this saturday and ran a 14.3 at 98 mph. now it seems to me to be a very slow time. i have an e cam gt40y heads and 3.73 gears along with cold air full exhaust. and a short throw. i know a lot of this could be driver error since it was my first time but i was expecting 13's fairly easy. now it was like 45 degrees on street tires full psi and everything else normal. can you tell me if this is respectable of if maybe im missin something. i wouldnt think that it was all me but i guess it could be. anything will help thanks
 
T

thinker

Founding Member
Jun 26, 2002
182
0
0
Corona, Ca
May 17, 2005
#2
  • May 17, 2005
  • #2
Yeah you shoul dbe running faster times then that. Last sat I was at fontana dragway in cali and I was running 14.20s @ 98mph with a 2.20 60ft time and my motor is bone stock so you should be in the 13s. I should be in the 13s too if I could get my damn launch right
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
May 17, 2005
#3
  • May 17, 2005
  • #3
You have an easily 13 second capable car. Practice, practice, practice.

What were your 60' foot times? If it was 45 degrees out the track was probably not very sticky. Did you speed shift or let up and shift and get back on the gas?

Don't feel too bad. When my convertible was stock it ran 15.4's no matter what I tried. Gears helped and little bits and pieces and practice got it down to 13.78. It weigh's about 3650 lbs with me in it. So 13.78 isn't too bad, but I've still never did a 60 foot better than 1.91.

Moral of the story work on your launch. It's cruicial.
 

Daniel50

New Member
Mar 30, 2005
716
1
0
Discovery Bay, CA
May 17, 2005
#4
  • May 17, 2005
  • #4
yeah i ran a 14.2 @97 with my mods which isnt much at all
 

camarokiller5.0

New Member
Nov 3, 2004
48
0
0
Dallas
May 18, 2005
#5
  • May 18, 2005
  • #5
if you have stock intakes that could be it, i run 13.9 at 1500ft above sea level, i think my stock maf is killing my time.
 
8

87pony

Member
Oct 14, 2004
69
0
6
May 20, 2005
#6
  • May 20, 2005
  • #6
i spun almost all the way through first, i just bought explorer intakes but im waitin ona fuel pump before i put em on. it didnt seem real stick but i had never done it before so i dont really know
 
C

cooter_11

Member
Apr 22, 2005
138
0
16
GA
May 20, 2005
#7
  • May 20, 2005
  • #7
I think the track temperature was a huge factor in your times. 45 degrees is pretty freakin cold. I'd just try waiting for a warmer day and see how you do. You might even want to play around with tire pressure a little, but be careful with street tires. It's also not a real good idea to get them too hot. Just spin them a little to get the dirt off but that's about all you want to do with a stock street tire. Try playin around with your launch RPM and things like that to try and limit your spinning.

And of course, Practice makes perfect...without a doubt.

Good luck bro.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,035
1,625
194
NJ
May 20, 2005
#8
  • May 20, 2005
  • #8
I dunno, i think it's the car in this situation, 98 mph doesn't suggest the car is running all that well. If traction was the real problem that would be higher.
 

camarokiller5.0

New Member
Nov 3, 2004
48
0
0
Dallas
May 20, 2005
#9
  • May 20, 2005
  • #9
yeah your stock intake is your problem, after you put those explore intakes its gona fly, it should get you to mid. 13s as long as you can plant that rubber!
 
You must log in or register to reply here.

Similar threads

2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
356
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
S
Timing chain, guides and tensioner installation (Possible orientation in Intake Stroke)
  • StallionMax
  • Sep 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
401
SN95 4.6L Mustang Tech Sep 24, 2025
StallionMax
S
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
591
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
9
Engine 94 GT breaking up
  • 996stang
  • Sep 21, 2024
  • Fox 5.0 Mustang Tech
Replies
19
Views
686
Fox 5.0 Mustang Tech Sep 26, 2024
AeroCoupe
S
5.0 Rebuild
  • smittys7up
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
584
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 20, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?