Alright guys
The time has come to rebuild the AOD in my 93 GT and I am going to try to do it myself.
Here is the current condition of the trans. It has the stock converter and a Transgo shiftkit installed in it. And no OD. That is the main problem right now. With no OD and 4.10s it sucks a lot of gas and is a bear to drive on the highway. 3600rpm @65.
I am planning on getting an Edge converter but am not sure if I should stay lock up or go non lockup. The car is pretty much just a weekend car that seems to find its way to the dragstrip about every two weeks. Funny how that works. Any suggestions would be appreciated on what type of converter.
Since the OD band is shot I know that I am going to have to replace it and I figured that I would put an A+ servo in at the same time. What else do I need to look at/replace while I am working on the trans?
Since I have it out should I just go ahead and put in new clutches and basically rebuild the whole thing?
If so what type of clutches would be best?
Do I need a hardened input shaft? I do have a nitrous kit and at some point will probably go up to a 150hp shot.
I would like to get a lentech valve body and have the nice OD delete instead of the crappy stock shift pattern.
Any help would be greatly appreciated and any suggestions on specific parts or brands would be nice as well. If there is something major that I a missing let me know.
Thanks
The time has come to rebuild the AOD in my 93 GT and I am going to try to do it myself.
Here is the current condition of the trans. It has the stock converter and a Transgo shiftkit installed in it. And no OD. That is the main problem right now. With no OD and 4.10s it sucks a lot of gas and is a bear to drive on the highway. 3600rpm @65.
I am planning on getting an Edge converter but am not sure if I should stay lock up or go non lockup. The car is pretty much just a weekend car that seems to find its way to the dragstrip about every two weeks. Funny how that works. Any suggestions would be appreciated on what type of converter.
Since the OD band is shot I know that I am going to have to replace it and I figured that I would put an A+ servo in at the same time. What else do I need to look at/replace while I am working on the trans?
Since I have it out should I just go ahead and put in new clutches and basically rebuild the whole thing?
If so what type of clutches would be best?
Do I need a hardened input shaft? I do have a nitrous kit and at some point will probably go up to a 150hp shot.
I would like to get a lentech valve body and have the nice OD delete instead of the crappy stock shift pattern.
Any help would be greatly appreciated and any suggestions on specific parts or brands would be nice as well. If there is something major that I a missing let me know.
Thanks