• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Time to replace the Valve Seals

  • Thread starter Thread starter vristang
  • Start date Start date Jun 28, 2006

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 28, 2006
#1
  • Jun 28, 2006
  • #1
Well my valve seals are toast.

I have decided to replace them myself, hopefully this weekend.

Any thoughts on valve spring compressors are welcome.
I have a C-compressor now, but don't feel safe using it.
I think I will buy a lever bar compressor locally.

Anyone have tips or advice? This is my first time

The heads are TrickFlow Twisted Wedge.
I have yet to hear back from TrickFlow for part numbers on the seals.

Should I plan on replacing the locks while I am at it?

Thanks Stangnet,
jason
 
R

R2D2

Jun 29, 2006
#2
  • Jun 29, 2006
  • #2
c clamp compressor is the only thing I would use personally. Using them for the last 15 years. As for the valve seal they are Viton .500" I.D. x .700" O.D.x 11/32" stem ( TFS-51400454 ) As for the locks, thats up to you really. They are cheap.
 

z2o_what

Member
Mar 31, 2005
309
1
19
princeton, WV
Jun 29, 2006
#3
  • Jun 29, 2006
  • #3
if your doing them while the heads are on the engine... dont "drop a valve" lol

i guess thats why you use one of those fitting that hook up to an air compressor.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jun 29, 2006
#4
  • Jun 29, 2006
  • #4
Use Viton Seals on int and exh, and any local machine shop should have them in stock I think they are a .530" for an 11/32" valve. If you do not have a seal installer you can use a 12mm 12pt socket to push them done over the guides, use oil and the small plastic valve cover so you do not rip the seal.

Are the heads on or off the motor?

Locks are cheap I like to replace them, along with inspecting the retainers.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 29, 2006
#5
  • Jun 29, 2006
  • #5
I was planning on pulling the heads. Right now the motor is running, so I can get to work. It will only take a few more hours to pull the heads.

Thanks for the dimensions for replacement seals.

Will most local parts stores have the seals I need, or will I have to go to a machine shop?

Maybe a dumb question - What is Viton? material, design type, or what?
I have been told positive seals are what I need, but found an old thread talking about umbrella seals.

Thanks again for the info guys

jason
 

mattmcdan

Member
Apr 19, 2006
176
0
19
Okeechobee, Florida
Jun 29, 2006
#6
  • Jun 29, 2006
  • #6
Viton is a good seal unlike the brittle black plastic/rubber seals. They cost a little bit more, but you wont have to do the job again with viton seals for awhile.My .02
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jun 29, 2006
#7
  • Jun 29, 2006
  • #7
Viton is a material, they should be a positive seal type... Just verify the guide size with TFS, but I am pretty sure the size I posted is correct.

I know my local machine shop stocks the seals, should be around $1.00-1.25/pc
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jun 29, 2006
#8
  • Jun 29, 2006
  • #8
If you get the compressor adapter that holds the valves up its much faster.
 

352Ford2

New Member
Oct 12, 2005
393
0
0
Seattle,WA
Jun 29, 2006
#9
  • Jun 29, 2006
  • #9
umbrella seals are a older design found on the early pedistal mouted factory heads, don't worie about those, they arn't what you are dealing with. Your head was designed to have pos seals.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 29, 2006
#10
  • Jun 29, 2006
  • #10
I appreciate all the responses.

I called Trickflow and they were great. The techy that answered the phone new exactly what I wanted. When he found out I was in a hurry to get the job done he placed an order for me through summitracing to overnight them to my house. Pretty cool if you ask me.

He is shipping me a set of 16 positive Viton seals, part number 51400454.


Next Question...
Could I use my Leakdown test kit to replace the seals without pulling the heads?
Would this also help me determine if the valves are sealing well against the seats?
I should hear an air leak past a valve, right?

Thanks again for helping the valve seal rookie, :SNSign:
jason
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 30, 2006
#11
  • Jun 30, 2006
  • #11
One last bumpity bizump for the following...

Could I use my Leakdown test kit to replace the seals without pulling the heads?
Would this also help me determine if the valves are sealing well against the seats?
I should hear an air leak past a valve, right?


Many thanks,
jason
 
R

R2D2

Jun 30, 2006
#12
  • Jun 30, 2006
  • #12
vristang said:
I appreciate all the responses.

I called Trickflow and they were great. The techy that answered the phone new exactly what I wanted. When he found out I was in a hurry to get the job done he placed an order for me through summitracing to overnight them to my house. Pretty cool if you ask me.

He is shipping me a set of 16 positive Viton seals, part number 51400454.


Next Question...
Could I use my Leakdown test kit to replace the seals without pulling the heads?
Would this also help me determine if the valves are sealing well against the seats?
I should hear an air leak past a valve, right?

Thanks again for helping the valve seal rookie, :SNSign:
jason
Click to expand...
just like i told you in the second reply
 
8

89SaleenGT

New Member
Dec 24, 2003
32
0
0
Jun 30, 2006
#13
  • Jun 30, 2006
  • #13
vristang,
If you do decide to replace these seals on the car, you will have to regulate the pressure way down to prevent the engine from turning when applying the air. I had to go as low at 25psi to keep the engine from turning when the air was applied.

One thing you can do prevent the engine from moving is to use a breaker bar and socket on the damper bolt and wedge that against the frame each time you complete a cylinder.

If you don't want to use air you can always stuff some rope or string in the spark plug hole to prevent the valve from dropping.

Keepers are inexpensive. Just make sure you use hardened keepers.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 30, 2006
#14
  • Jun 30, 2006
  • #14
sbftech said:
just like i told you in the second reply
Click to expand...


Yep, you told me so.
"Neener, Neener" heard loud and clear.



Thanks again to everyone who chimed in.

I will try to come back an post some pics of the job for anyone who finds this thread on a search.

:SNSign:

jason
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 30, 2006
#15
  • Jun 30, 2006
  • #15
89SaleenGT said:
vristang,
If you do decide to replace these seals on the car, you will have to regulate the pressure way down to prevent the engine from turning when applying the air. I had to go as low at 25psi to keep the engine from turning when the air was applied.

One thing you can do prevent the engine from moving is to use a breaker bar and socket on the damper bolt and wedge that against the frame each time you complete a cylinder.

If you don't want to use air you can always stuff some rope or string in the spark plug hole to prevent the valve from dropping.

Keepers are inexpensive. Just make sure you use hardened keepers.
Click to expand...

Why not just let the motor kick over like on a leakdown test?
Again I am new to this task so you might have to use small words?

thanks
jason
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
753
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
S
New misfire after replacing valve seals/springs.
  • SpeedofDarkness
  • Aug 24, 2025
  • SN95 V6 Mustang Tech
Replies
0
Views
321
SN95 V6 Mustang Tech Aug 24, 2025
SpeedofDarkness
S
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
672
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
S
Hello from Minnesota (and the ancient MustangBoards)
  • SpeedofDarkness
  • Aug 24, 2025
  • The Welcome Wagon
Replies
0
Views
297
The Welcome Wagon Aug 24, 2025
SpeedofDarkness
S
A
95 Gt intermittent backfire
  • A_A_Ron
  • May 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
508
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2025
A_A_Ron
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?