Timing Blues

DFG 5OH

Active Member

Aug 28, 2004

1,341

0

36

Louisville, KY

Feb 25, 2006

#1

• Feb 25, 2006

• #1

OK i ****ed up. First i did everything right, when i hit the balancer with the timing light, i couldn't see my marks, i turned the dizzy clockwise to advance a little, bolted everything back up and took it for a spin, i couldnt get over 2500 rpms without having a **** load of pinging, so i drove home, and got everything ready, turned her on, and went to turn the dizzy couter-clockwise to retard the timing some, and get it back...but it wouldnt turn back, or forward for that matter...and the bolt is loose...WTF...

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Feb 25, 2006

#2

• Feb 25, 2006

• #2

dizzy should turn... does it turn with the motor off?

maybe you just need to muscle it a lil more... but dont go crazy and break something

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Feb 25, 2006

#3

• Feb 25, 2006

• #3

Loosen the bolt a little more - they can be really grabby in general (esp SBC's in my experience).

I would not have touched that timing if you couldnt see where you were at to start with. If your balancer spun (so your timing marks are off), now you wont know where you started since your point of reference is off).

Good luck.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Feb 25, 2006

#4

• Feb 25, 2006

• #4

Put a little PB Blaster, WD40, Liquid Wrench or the like around the base of the dizzy as they can get kinda stuck at times.

Just keep fooling around with it Matt, and it will free up.

Grady

 

Dan95-5.0

Active Member

Jun 14, 2003

1,110

0

36

Manitoba, Canada

Feb 26, 2006

#5

• Feb 26, 2006

• #5

when i did my timing for the first time, i had a similar problem. counldnt see it.

this is what i did. sand down the balancer where it has the timing marks. get some white-out or paint and mark where you want the timing to be. i checked the timing in my garage where it was darker and i could see it clear as day compared to doing it outside in the bright morning sun.

you did remove the spout right?

try removing the bolt and the hold down all together

good luck