Timing chain cover

Bronco Bart · Sep 8, 2022

Can I use this timing chain cover off a fuel injection 302 from this 92-96 f150 on my 89 302ho???

Bronco Bart · Sep 8, 2022

Bronco Bart · Sep 8, 2022

I was after the transmission out of this truck to keep before scrap yard come from it. But I broke the first bolt I tried on my mustang so I put it back together so I could drive it and thought I'd get some heat and get this cover incase I need it or can use it

Bullitt347 · Sep 8, 2022

Yes, provided you can get it removed from that engine without breaking anything and then cleaning it up real good.

Bronco Bart · Sep 8, 2022

Bronco Bart · Sep 8, 2022

Bronco Bart said:

96pushrod · Sep 8, 2022

It’s funny, I just had an issue related to this on Tuesday. A fox I was working on actually had a truck timing cover. I did a hci swap and went to put the timing cover and water pump on, only to discover the fox body wp gasket I had didn’t fit since the holes are oriented differently.

Keep that in mind, the truck and fox take different water pumps as well as wp gaskets.

90sickfox · Sep 8, 2022

The truck WP usually turns the opposite direction. The coolant holes in that timing cover look like they are angled wrong for a fox WP. Definitely compare them to each other.

96pushrod · Sep 9, 2022

90sickfox said:
The truck WP usually turns the opposite direction. The coolant holes in that timing cover look like they are angled wrong for a fox WP. Definitely compare them to each other.

The serpentine trucks all have reverse rotation pumps.

Bronco Bart · Sep 9, 2022

Bronco Bart · Sep 9, 2022

Bronco Bart · Sep 9, 2022

The top.hole.in the cover don't line up with any on the pump. All other holes line up I think

96pushrod · Sep 9, 2022

Is the edelbrock pump for a mustang?

Bronco Bart · Sep 9, 2022

96pushrod said:
Is the edelbrock pump for a mustang?

Bronco Bart · Sep 9, 2022

Bronco Bart · Sep 9, 2022

Bronco Bart · Sep 9, 2022

Mustang5L5 · Sep 9, 2022

The water port configuration is incorrect. This is what it should be for a Mustang

Here’s the Mustang Edelbrock WP. Looks a bit different that they one you have but that could just be due to truck vs Mustang

limp · Sep 9, 2022

My engine gasket kit came with about 8 different water pump gaskets so there are different pump/timing gear covers.....

Bronco Bart · Sep 9, 2022

Ya when I bought the pump I got it for a 89 Mustang 5.0... it said it would fit on the fitment but it doesn't look right. Weird that both of those gaskets came with the pump.

Timing chain cover

Member

Member

Member

I have been doing it wrong this whole time

Member

Member

I think they're a little easier to get off

Wasn't a pretty sight...and I've got big hands

I think they're a little easier to get off

Member

Member

Member

I think they're a little easier to get off

Member

Member

Member

Member

That is…until I whipped out my Bissell

wrap a little cheese around it and its a done

Member

Similar threads

Privacy & Transparency

Privacy & Transparency