TKO 600 INSTALL ?

stick

New Member
Jan 28, 2004
9
0
0
Im doing a tko 600 install on my 92 Mustang. Was wondering if anyone knew where to find a already modified crossmember that will work. I heard a 96 cobra mount will work but will it bolt up to my 92? Does anyone know who sells it and how much. Also is it that necessary to get an extended clutch fork? I have the quadrant and firewall adjuster. I know I need a 31 spline slip yoke but does the driveshaft have to be shorten or anything?

Thanks
Ryan
 
I bought a crossmember from HPM that is specifically designed for the TKO. It was about $100. Or you can buy the Ford Racing adjustable crossmember and have it tack-welded once you get it installed. You won't need the extended clutch fork unless you're using a scattershield, and the driveshaft won't need to be shortened. Just swap out the yoke and that's it.
 
Is there much of a difference between the solid design of the HPM vs. the rewelding stock one? I am looking at one myself and was worried that it would just transfer the vibrations to my seat. A little bit is not a big deal but this is still a street car so I don't really need all that much rigidity. Thanks
Kevin
 
Sicarius428 said:
Is there much of a difference between the solid design of the HPM vs. the rewelding stock one? I am looking at one myself and was worried that it would just transfer the vibrations to my seat. A little bit is not a big deal but this is still a street car so I don't really need all that much rigidity. Thanks
Kevin


I really didn't notice any added vibration when I went to the HPM crossmember. Unless I'm mistaken, all 94-present Mustangs don't use bushings on the crossmember
 
Tremec TKO600 Shifter question?

I just but a TKO600 tranny in my 1984 GT350 and i was wondering what the best shifter is for it. The one that comes on it sucks. i had a B and M on my T5 and i loved it. It was The shortest ive ever seen in a mustang. :SNSign:
 
The TKO600 comes from the factory with a pretty nice Hurst billet shifter. I thought it was pretty nice, except for the fact that it doesn't come with a handle. I switched mine out for a Pro5.0, and I'm happy with it. I had a Pro5.0 on my T5 for years
 
Sicarius428 said:
hrm... do you guys suggest a poly mount too or would that not absorb enough?
Kevin


I have poly engine and trans mounts in my car, along with the HPM crossmember and a fairly large cam. There is really no added vibration or harshness. If there is I would say it's negligible. Just my opinion though, could be I'm just used to it
 
I just ordered the HPM unit. Thanks for the input. I can always get to the poly mount fairly easily if I decide to change it out... Just a bit short on funds 2300 dollars later into this upgrade. Unlike modifying my crossmember... I wouldn't want to do all that work and eventually replace it. From the sounds of it the HPM is far superior in strength, ease or install and no breaking/wearing on the tailshaft. Thats worth 100 bucks to me.
Kevin