• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

TKO 600 INSTALL ?

  • Thread starter Thread starter stick
  • Start date Start date May 24, 2006
S

stick

New Member
Jan 28, 2004
9
0
0
May 24, 2006
#1
  • May 24, 2006
  • #1
Im doing a tko 600 install on my 92 Mustang. Was wondering if anyone knew where to find a already modified crossmember that will work. I heard a 96 cobra mount will work but will it bolt up to my 92? Does anyone know who sells it and how much. Also is it that necessary to get an extended clutch fork? I have the quadrant and firewall adjuster. I know I need a 31 spline slip yoke but does the driveshaft have to be shorten or anything?

Thanks
Ryan
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
May 24, 2006
#2
  • May 24, 2006
  • #2
I bought a crossmember from HPM that is specifically designed for the TKO. It was about $100. Or you can buy the Ford Racing adjustable crossmember and have it tack-welded once you get it installed. You won't need the extended clutch fork unless you're using a scattershield, and the driveshaft won't need to be shortened. Just swap out the yoke and that's it.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
May 24, 2006
#3
  • May 24, 2006
  • #3
Is there much of a difference between the solid design of the HPM vs. the rewelding stock one? I am looking at one myself and was worried that it would just transfer the vibrations to my seat. A little bit is not a big deal but this is still a street car so I don't really need all that much rigidity. Thanks
Kevin
 
S

stick

New Member
Jan 28, 2004
9
0
0
May 24, 2006
#4
  • May 24, 2006
  • #4
I have a SFI approved McLeod bellhousing so I should probably look into a extended clutch fork
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
May 24, 2006
#5
  • May 24, 2006
  • #5
Sicarius428 said:
Is there much of a difference between the solid design of the HPM vs. the rewelding stock one? I am looking at one myself and was worried that it would just transfer the vibrations to my seat. A little bit is not a big deal but this is still a street car so I don't really need all that much rigidity. Thanks
Kevin
Click to expand...


I really didn't notice any added vibration when I went to the HPM crossmember. Unless I'm mistaken, all 94-present Mustangs don't use bushings on the crossmember
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
May 25, 2006
#6
  • May 25, 2006
  • #6
hrm... do you guys suggest a poly mount too or would that not absorb enough?
Kevin
 
M

mat84gt350

New Member
May 25, 2006
12
0
0
Chattanooga, Tn
May 25, 2006
#7
  • May 25, 2006
  • #7
Tremec TKO600 Shifter question?

I just but a TKO600 tranny in my 1984 GT350 and i was wondering what the best shifter is for it. The one that comes on it sucks. i had a B and M on my T5 and i loved it. It was The shortest ive ever seen in a mustang. :SNSign:
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
May 25, 2006
#8
  • May 25, 2006
  • #8
The TKO600 comes from the factory with a pretty nice Hurst billet shifter. I thought it was pretty nice, except for the fact that it doesn't come with a handle. I switched mine out for a Pro5.0, and I'm happy with it. I had a Pro5.0 on my T5 for years
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
May 25, 2006
#9
  • May 25, 2006
  • #9
Sicarius428 said:
hrm... do you guys suggest a poly mount too or would that not absorb enough?
Kevin
Click to expand...


I have poly engine and trans mounts in my car, along with the HPM crossmember and a fairly large cam. There is really no added vibration or harshness. If there is I would say it's negligible. Just my opinion though, could be I'm just used to it
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
May 26, 2006
#10
  • May 26, 2006
  • #10
I just ordered the HPM unit. Thanks for the input. I can always get to the poly mount fairly easily if I decide to change it out... Just a bit short on funds 2300 dollars later into this upgrade. Unlike modifying my crossmember... I wouldn't want to do all that work and eventually replace it. From the sounds of it the HPM is far superior in strength, ease or install and no breaking/wearing on the tailshaft. Thats worth 100 bucks to me.
Kevin
 
You must log in or register to reply here.

Similar threads

S
Engine Edelbrock 1406 install help
  • scottcarp10
  • Dec 11, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
392
Fox 5.0 Mustang Tech Dec 15, 2025
scottcarp10
S
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
749
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
321
Suspension Jul 23, 2026
JasonB66
J
P
Drivetrain 1988 T5 Grinding going into 2nd gear, '92 Camaro transmission swap or parts?
  • pindude80
  • May 7, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
43
Views
5K
Fox 5.0 Mustang Tech Jun 11, 2024
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?