To buy or not to buy...Performer RPM

samickguy15

Member

Sep 1, 2005

404

0

16

Delavan, IL

Oct 26, 2007

#1

• Oct 26, 2007

• #1

There's one for sale locally, and I have no idea if he's asking a good price or not. I can get it for $300 out the door. The guy ported the lower some and gasket matched to a Felpro 1262. The only problem is that theres a small crack on the upper manifold rear mounting hole. I would imagine I'll just slap a good bit of JB weld on it or maybe get a local guy to weld it. Is $300 a good deal or should I see if he'll come down? I'm not sure he'll budge much, but I guess we'll see....Thoughts?

 

ninety15.0

New Member

Mar 10, 2004

1,336

0

0

Oct 26, 2007

#2

• Oct 26, 2007

• #2

Are you running stock heads? that felpro 1262 is pretty big...the normal lower intake gasket is the 1250 IIRC. I think that would leave you with a horrible restriction at the heads. I think an intake like that would be much better matched to a AFR 185, TW, or canfield headed combo with a cam ground to take advantage of that flow and higher powerband.

You would probably loose a substantial amount of low end TQ...and with stock heads and cam...it would still die out at 5200 rpm.

I would save your money for a ported performer or trick flow intake...especially if you have stock heads. And if the thing is cracked who wants to lay out 300 bucks for an intake with a broken/cracked mounting tab....JB would not be the answer for that application.

 

PUNISHER RACING

Active Member

Aug 27, 2007

1,124

0

36

FORD CITY, PA.

Oct 26, 2007

#3

• Oct 26, 2007

• #3

Have it welded if you buy it tell him you will give him $250 for it it will take 40.00 or so to get it welded up right. That is still a good intake manifold and if ported right will work well even on a bigger combo.

 

samickguy15

Member

Sep 1, 2005

404

0

16

Delavan, IL

Oct 26, 2007

#4

• Oct 26, 2007

• #4

So for the price, is it a deal? What do they usually go for used?

 

SuperStang83

Founding Member

Mar 21, 2001

1,693

0

49

Boyertown, Pa

Oct 26, 2007

#5

• Oct 26, 2007

• #5

That's a good deal for the price, I think they are around $460 new.

 

samickguy15

Member

Sep 1, 2005

404

0

16

Delavan, IL

Oct 26, 2007

#6

• Oct 26, 2007

• #6

I'm probably going to get it and spring for a 351W lower from Professional Products. I think it will suit my Windsor better than the 5.0

 

EXTRPR50

Founding Member

Oct 7, 1998

370

1

19

Oct 26, 2007

#7

• Oct 26, 2007

• #7

Maybe someone who has had one welded could chime in. To see if it fixes the prob w/o more probs.

 

PUNISHER RACING

Active Member

Aug 27, 2007

1,124

0

36

FORD CITY, PA.

Oct 26, 2007

#8

• Oct 26, 2007

• #8

You can have that welded up no problem weld it up solid and redrill it if you lived around me I would tig it for you

 

8

88blacklx

Banned

Jul 2, 2007

13

0

0

Oct 27, 2007

#9

• Oct 27, 2007

• #9

i paid 190 bux for two ears to be replaced on minel. I got the intake for free tho so it was a no brainer for me. The ears were snapped off completely and they had to put it onto the mill after they made the new tabs, so that it would sit flush and all