• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

top end kit decisions..

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Feb 22, 2008

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Feb 22, 2008
#1
  • Feb 22, 2008
  • #1
anderson ultimate street strip forced induction top end kit or trick flow top end kit? for new 347 build? 1350 difference in price..
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 22, 2008
#2
  • Feb 22, 2008
  • #2
What are your goals? Street, Race, street strip, how fast you want to go? Stock block? Budget etc...?
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Feb 22, 2008
#3
  • Feb 22, 2008
  • #3
Hey Mazroth, well its a convertible, so more so the usage would be street, but street strip, would work too, I am not dependent on the car as a daily driver, moreso a weekend, occassional summer driver. I don't have any specific goals for power, but want to spend money efficiently, eg. best hp/$ ratio, .. and at the same time, don't want to regret not doing something, while I rebuild, this car is really just a hobby to me, I love working on it and would love to get into tuning, I love this site, get lots of great answers, and people are always interested and willing to give advice, help, etc. I know sometimes you can almost go too far, and when it comes to reliability, and longevity, maybe just the n/a setup would be good!
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Feb 22, 2008
#4
  • Feb 22, 2008
  • #4
For a 347 definetely the cnc'd heads
Are you going forced induction? If so, that setup is going to easily overpower the stock block.
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Feb 22, 2008
#5
  • Feb 22, 2008
  • #5
Hey 2000xp8, I actually already purchased the 347 kit, so I guess to revise my question, I should have added that variable..
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 22, 2008
#6
  • Feb 22, 2008
  • #6
AnthonyR23 said:
Hey Mazroth, well its a convertible, so more so the usage would be street, but street strip, would work too, I am not dependent on the car as a daily driver, moreso a weekend, occassional summer driver. I don't have any specific goals for power, but want to spend money efficiently, eg. best hp/$ ratio, .. and at the same time, don't want to regret not doing something, while I rebuild, this car is really just a hobby to me, I love working on it and would love to get into tuning, I love this site, get lots of great answers, and people are always interested and willing to give advice, help, etc. I know sometimes you can almost go too far, and when it comes to reliability, and longevity, maybe just the n/a setup would be good!
Click to expand...

Same for me with my coupe, 90% street, rest for the track, and I dont drive it much. But I wanted a 306, didnt stroke it, after my dyno, alot doubt that it is a 306, I just need to take it to the track to see how it runs. Since yours is a vert, and not a dd, I would definitely put some stroke to it. 331/347, alot will tell you to put some big heads on it, makes for some awesome top end power, but you dont use that real often on the street. You could probably throw some afr185s, holley intake, with a custom cam on a 331/347 and put down 360hp/380tq territory, and make all its power below 6k. Bigger head will make more power, you could probably say 400hp, 350 torque, by 6k, more you rev it, the more power it will make with a matched cam and intake.

I like the n/a way, takes more knowledge to make more power with less, and it thus far seems more dependable. With the stock block, I would try and keep rpms under 6k, 331/347, at least some afr185s, the tfs cnc 185s seem nice too. Check with afm on those heads you mentioned, I talked to them when I was building my 306, and saw them when they were abotu to go on sale, Brian there told me they were for more rpm than what I was wanting.

Just do your research before spending, pay attention to detail, and people with throw up the bs flag when you telll them how fast it is. Let me know if you need any tips on the detail part.
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 22, 2008
#7
  • Feb 22, 2008
  • #7
2000xp8 said:
For a 347 definetely the cnc'd heads
Are you going forced induction? If so, that setup is going to easily overpower the stock block.
Click to expand...

I definely wouldnt just throw on some heads and intake with a small cam, seen many trickflow top end kits on 347s with the stage 1 cam, making around 320hp, and 380tq at the wheels, its nice power, but with better matched parts, more power can surely be had. CNC heads are a great bang for the buck, afr showed us that, now you can buy tfs heads that way too.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
614
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
847
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
448
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
186
The Welcome Wagon Jul 3, 2026
5150K
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?