top end kit decisions..

Hey Mazroth, well its a convertible, so more so the usage would be street, but street strip, would work too, I am not dependent on the car as a daily driver, moreso a weekend, occassional summer driver. I don't have any specific goals for power, but want to spend money efficiently, eg. best hp/$ ratio, .. and at the same time, don't want to regret not doing something, while I rebuild, this car is really just a hobby to me, I love working on it and would love to get into tuning, I love this site, get lots of great answers, and people are always interested and willing to give advice, help, etc. I know sometimes you can almost go too far, and when it comes to reliability, and longevity, maybe just the n/a setup would be good!
 
Hey Mazroth, well its a convertible, so more so the usage would be street, but street strip, would work too, I am not dependent on the car as a daily driver, moreso a weekend, occassional summer driver. I don't have any specific goals for power, but want to spend money efficiently, eg. best hp/$ ratio, .. and at the same time, don't want to regret not doing something, while I rebuild, this car is really just a hobby to me, I love working on it and would love to get into tuning, I love this site, get lots of great answers, and people are always interested and willing to give advice, help, etc. I know sometimes you can almost go too far, and when it comes to reliability, and longevity, maybe just the n/a setup would be good!

Same for me with my coupe, 90% street, rest for the track, and I dont drive it much. But I wanted a 306, didnt stroke it, after my dyno, alot doubt that it is a 306, I just need to take it to the track to see how it runs. Since yours is a vert, and not a dd, I would definitely put some stroke to it. 331/347, alot will tell you to put some big heads on it, makes for some awesome top end power, but you dont use that real often on the street. You could probably throw some afr185s, holley intake, with a custom cam on a 331/347 and put down 360hp/380tq territory, and make all its power below 6k. Bigger head will make more power, you could probably say 400hp, 350 torque, by 6k, more you rev it, the more power it will make with a matched cam and intake.

I like the n/a way, takes more knowledge to make more power with less, and it thus far seems more dependable. With the stock block, I would try and keep rpms under 6k, 331/347, at least some afr185s, the tfs cnc 185s seem nice too. Check with afm on those heads you mentioned, I talked to them when I was building my 306, and saw them when they were abotu to go on sale, Brian there told me they were for more rpm than what I was wanting.

Just do your research before spending, pay attention to detail, and people with throw up the bs flag when you telll them how fast it is. Let me know if you need any tips on the detail part.
 
For a 347 definetely the cnc'd heads
Are you going forced induction? If so, that setup is going to easily overpower the stock block.

I definely wouldnt just throw on some heads and intake with a small cam, seen many trickflow top end kits on 347s with the stage 1 cam, making around 320hp, and 380tq at the wheels, its nice power, but with better matched parts, more power can surely be had. CNC heads are a great bang for the buck, afr showed us that, now you can buy tfs heads that way too.