toploader ID

[flexiclese]

Can some one point me to an internet resource for Toploader ID #'s. I have the interchange manual, but I have noticed that it lacks some #'s. I need a resouce that has part #'s for cases and tail sections in addtion to tag #'s. I have seen several transmissions thus far that have inacurate tag #'s, I cannot go by it alone. I have already used david kee's site as well as 5speed website but they only reference tag ID's.
thanks in advance, dave

 

[dennis112]

Can some one point me to an internet resource for Toploader ID #'s. I have the interchange manual, but I have noticed that it lacks some #'s. I need a resouce that has part #'s for cases and tail sections in addtion to tag #'s. I have seen several transmissions thus far that have inacurate tag #'s, I cannot go by it alone. I have already used david kee's site as well as 5speed website but they only reference tag ID's.
thanks in advance, dave

In addition to the ID tags, David Kee's site also lists the casting #'s of both the cases and the tail housings. It does not list the Ford part #'s that would be found in the dealer's parts manual.

http://www.davidkeetoploaders.com/main_case_id.htm for cases.

http://www.davidkeetoploaders.com/tailhousingid.htm for tailhousings.

I know of no other site that is nearly as complete.

 

[D.Hearne]

Can some one point me to an internet resource for Toploader ID #'s. I have the interchange manual, but I have noticed that it lacks some #'s. I need a resouce that has part #'s for cases and tail sections in addtion to tag #'s. I have seen several transmissions thus far that have inacurate tag #'s, I cannot go by it alone. I have already used david kee's site as well as 5speed website but they only reference tag ID's.
thanks in advance, dave

Those you ran across likely had accurate tags, but after 40 years, lots of these transmissions have gone thru transformations............. The four I had back in the 80's were such. In the end, I had built one from parts of three others. And the one in my 89 Ranger is another. It's a small block 67 or 68 wide ratio transmission with a 390 Mustang/Fairlane tailhousing. I did that to be able to move the shifter farther forward for the Ranger.

 

[flexiclese]

In addition to the ID tags, David Kee's site also lists the casting #'s of both the cases and the tail housings. It does not list the Ford part #'s that would be found in the dealer's parts manual.

http://www.davidkeetoploaders.com/main_case_id.htm for cases.

http://www.davidkeetoploaders.com/tailhousingid.htm for tailhousings.

I know of no other site that is nearly as complete.

That was exactly what i was looking for, had not discovered that part of his site, must have overlooked it.
Thanks for your help.
dave

 

[dennis112]