Tranny Cooler Help!?!?

JonDawg · Feb 25, 2004

Hi all. I got my V8 radiator (finally) and now I need to know what to use to hook up the trans cooler tank to my AOD.
First, I dont think the cooling lines are pressurized, but it sure leaks like a siv when I use fuel line. So, what do ya'll use? Also, What fittings go into the tank itself? I called Summit, and they said its not the same stuff they have in their catalogue. So what fittings are they, and where do I get em? also what size?

Im sorry if these are dumb questions, but Im having a brain fart (new job n all)

Thanx for the help.
Jon.

zwhitr · Feb 26, 2004

Cooler lines are pressurized

Most of us use the stock steel lines, however I have been enterning the idea of new stainless braided rubber line front to back I have one small patch piece that works fine with hose clamps but looks like a$&

cobraii351 · Feb 26, 2004

Always, always, always, use line/hose that is rated for or labeled for tranmission cooler use. There is a difference.

Tim

chaka · Feb 26, 2004

JonDawg said:
First, I dont think the cooling lines are pressurized, but it sure leaks like a siv when I use fuel line. So, what do ya'll use? Also, What fittings go into the tank itself? So what fittings are they, and where do I get em? also what size?

Im sorry if these are dumb questions, but Im having a brain fart (new job n all)

Thanx for the help.
Jon.

They sure as hell are pressurized.
I have used steel brake lines. You can buy the line at Autozone. It has two fittings. You will have to match it up. Want to say 5/16" line but am unsure.
Then to go to rubber I use EFI rubber fuel line and add a flare at the end of the hard line for a better seal. Has worked for me.

Wart · Feb 26, 2004

Check your mail.

JonDawg · Feb 26, 2004

Thanx all. Noone around here has a clue, so I had to ask the pros. Ill just take the radiator in to get the size of the fittings.

Now with the rubber lines, how do they seal to the steel lines? regular hose clamps? Ive got about 5" of steel line from the tranny, so if I can just flare it and put rubber lines on from there, so much the better.

Wart · Feb 26, 2004

JonDawg said:
Thanx all. Noone around here has a clue, so I had to ask the pros. Ill just take the radiator in to get the size of the fittings.

Now with the rubber lines, how do they seal to the steel lines? regular hose clamps? Ive got about 5" of steel line from the tranny, so if I can just flare it and put rubber lines on from there, so much the better.

Hoosierbigdaddy@juno.com

You don't read replies to questions you post to The List ?

chaka · Feb 26, 2004

You can either use a compression fitting between the hard lines,
But as long as you use EFI fuel line with hose clamps and flare the hard line a bit it will hold.

COBRA 7 · Feb 27, 2004

When putting your steel line to the flexable hose...( Fuel injection line or hydraulic hose )... use a double flaring tool on the steel line but don't do step two of the double flair.

This will leave like a bubble on the end of the line.

Kind of like this. <>=====

danimaltheanima · Feb 27, 2004

trans cooler lines

Call up Mustangs Unlimited. They sell exact fit stock cooler lines for the MII.

JonDawg · Feb 28, 2004

Wart said:
Hoosierbigdaddy@juno.com

You don't read replies to questions you post to The List ?

What are you talking about Wart? I havent gotten a thing except the reply notes. I even checked my PMs here, and I got nothin?

If you sent something, Please send it again. Im sorry, but I didnt recieve it.
.
.
.
.
.
Nevermind, I found it. That list is quite a bit behind "real-time" since I had it condenced into multiple posts. So I just got it when I logged on.
I appreciate it.

Thanx Mark, and thanx everyone.

Wart · Feb 29, 2004

JonDawg said:
What are you talking about Wart? I havent gotten a thing except the reply notes. I even checked my PMs here, and I got nothin?

If you sent something, Please send it again. Im sorry, but I didnt recieve it.
.
.
.
.
.
Nevermind, I found it. That list is quite a bit behind "real-time" since I had it condenced into multiple posts. So I just got it when I logged on.
I appreciate it.

Thanx Mark, and thanx everyone.

Don't blame The List, Jon, you posted a question and you didn't bother checking back.

Jon, you recieved 3 replies within 18 hours after posting your question. And the information was much better than anything you received here.

JonDawg · Feb 29, 2004

Mark, Dont be a Dick!!!

Some of us have more things to do than sit in our basements and type on car lists all day. You know, theyre called "lives"
Now for those who are jealous of us with these "lives" I suggest you go find one of your own. Then maybe you wont be so bitchy when others dont kiss your ass within 10 minutes of your reply.

Now if ya wanna keep it up, just GET OFF MY THREAD!!!!!!!!!

Wart · Feb 29, 2004

JonDawg said:
Mark, Dont be a Dick!!!

Some of us have more things to do than sit in our basements and type on car lists all day. You know, theyre called "lives"

Don't put your faults on me, Kid.

You don't understand why someone would be irked when they have taken the time from their lives to answer a question only to find the person asking the question was so frigging lazy as to not check back, then makes excuses.?

Or is it that your so egotistical as to think yours is the only time that has value?

Or is there another purpose to this?

Come on, Jon, you can tell us.

JonDawg · Feb 29, 2004

Oh, God forbid someone leave you waiting mark. and for 18 hours too. Oh, the nerve!!! (and Im egotistical )

Tell ya what, get up from behind your computer, walk out of your room, and take a look outside. Theres a bright orange ball in the sky, its called the sun. Go out and enjoy the heat.

After your playtime, we can talk more. Until then, Like I say, I have more than this piddly lil laptop to deal with.

So until you get over being a genital wart, I bid you adue!

JonDawg · Feb 29, 2004

JonDawg said:
Thanx all. Noone around here has a clue, so I had to ask the pros. Ill just take the radiator in to get the size of the fittings.

Ok, let me rephrase that. I mean noone in this area of the country. Not on this site. Well, Wart dont have a clue, but. . . . .

So, sorry for any confusion.

77sleeper · Feb 29, 2004

stop,

Tranny Cooler Help!?!?

JonDawg

Mstng2 supplied me with my pair

zwhitr

cobraii351

chaka

Wart

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

JonDawg

Mstng2 supplied me with my pair

Wart

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

chaka

COBRA 7

danimaltheanima

New Member

JonDawg

Mstng2 supplied me with my pair

Wart

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

JonDawg

Mstng2 supplied me with my pair

Wart

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

JonDawg

Mstng2 supplied me with my pair

JonDawg

Mstng2 supplied me with my pair

77sleeper

GO BUCS!

Similar threads

Tranny Cooler Help!?!?

Mstng2 supplied me with my pair

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

Mstng2 supplied me with my pair

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

New Member

Mstng2 supplied me with my pair

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

Mstng2 supplied me with my pair

I'm Mad as HELL and I'M not Gonna Take it ANYMORE!

Mstng2 supplied me with my pair

Mstng2 supplied me with my pair

GO BUCS!

Similar threads

Privacy & Transparency

Privacy & Transparency