tranny fill

[87gtfoxbody]

i got a 87 gt foxbody quick question can i fill my tranny from like the shifter box or w.e.?????????

 

[BlownFiveLiter]

T5? Pull the fill plug out, put a pan under the trans, and climb inside and remove the shifter. It should take roughly 2.8 quarts, and you'll know it's full when some fluid comes out the fill hole in the side and starts running into the pan. Pop the plug back in, pop the shifter back on, and go for a drive!

 

[jhonda]

If its the T5. ON mine I got some 1/2 plastic tubing and a small funnel. Snake the tubing down the fire wall then get under the car and put in in the fill hole, then fill

 

[Shakerhood]

If its the T5. ON mine I got some 1/2 plastic tubing and a small funnel. Snake the tubing down the fire wall then get under the car and put in in the fill hole, then fill

X2!

 

[grey5.0beast]

I found a better idea. I opened the shifter area but didn't unbolt the shifter, it was a bitch and I would have to reseal the shifter and ****. Instead I just took off the little rubber boot and put the funnel down right there and put about 1.5 feet of 3/8 inch tube into the fill hole. Worked great and was easy to do, didn't even have to jack up the car!

 

[85_SS_302_Coupe]

I hate to be the A-hole but this was just covered about 2 weeks ago

http://forums.stangnet.com/showthread.php?t=720059&highlight=trany+fill

The search button will get you the help you need, often much quicker than waiting for a reply

 

[Shakerhood]

I found a better idea. I opened the shifter area but didn't unbolt the shifter, it was a bitch and I would have to reseal the shifter and ****. Instead I just took off the little rubber boot and put the funnel down right there and put about 1.5 feet of 3/8 inch tube into the fill hole. Worked great and was easy to do, didn't even have to jack up the car!

You still have to crawl under and remove the Drain and Fill Plugs...

 

[87gtfoxbody]

and i can use ne auto tranny fluid 4 that or do i have to use like royal purple or w.e.