tranny not shifting need help

B

bobaganoosh

New Member

May 28, 2005

71

1

0

flower mound texas

Nov 13, 2005

#1

• Nov 13, 2005

• #1

my nephew has an 88 vert 2.3 auto with o/d.

it went to the upholstery shop for a new top and everything was fine there and back. then he drove to school the next day and on the way home the tranny would not shift out of 2nd gear. is there any vacume lines to check or should I be looking for something bigger? also if necessary which cars would be a good donor for another tranny.

thanks

mike

 

rd

Founding Member

Jan 12, 2000

3,316

63

109

Ocean Springs MS

Nov 14, 2005

#2

• Nov 14, 2005

• #2

I think the A4ld has a vacuum modulator, so check it.

Make sure the manual linkage is connected and adjusted, and make sure the kickdown linkage is connected and adjusted, and operating freely.

Next suggestion is to remove and clean the governor.

A4lds are in lots of cars, 4 banger tbird, cougars, mustangs, Rangers, Aerostars, etc.


However, be carefull about what you get, as the are several versions, such as two and 3 solenoid valve bodies, that don't necessarily interchange easily.

 

B

bobaganoosh

New Member

May 28, 2005

71

1

0

flower mound texas

Nov 14, 2005

#3

• Nov 14, 2005

• #3

thanks, I'll be headed over there in a little while and post what I find.

mike

 

HyYoSilver

Founding Member

Jul 11, 2000

1,339

1

38

On a creeper, underneath the car

Nov 14, 2005

#4

• Nov 14, 2005

• #4

Originally posted by rd:

Next suggestion is to remove and clean the governor.

Click to expand...

This would also be my guess. The speed/shift governor is located in the tailshaft housing and can be accessed with the trans in the car.

HYS

 

B

bobaganoosh

New Member

May 28, 2005

71

1

0

flower mound texas

Nov 14, 2005

#5

• Nov 14, 2005

• #5

okay, went over to my nephews house and started up the car while he was at school, first I noticed an unusually high idle speed and then when I lifted the hood I could hear a hissing noise. starting tracing the vacume system and found the vacume hose had poped off the tranny. everything is working fine again.

thanks for the advice

mike