TRANNY TICK

I installed a t-5-z tranny in my car yesterday, I unbolted my stocker from the bell housing and transfered from there. The problem was this,after I put everything back together i drove it and felt my clutch pedal vibrating, then whether i am in neutral or gear, i get a ticking noise from about 1200 rpm to 1800 rpm, then goes right away. If i rest my foot on the pedal it goes away. the tranny shifts perfectly fine, PLease help... one last thing, there is a steel bearing retainer on this transmission, but i noticed that the shaft on the retainer could move a bit..

thanks for any help or ideas

Skeezo83@hotmail.com

Nick

I stupidly did not replace the throw out bearing. do you happen to know if the bearing retainer shaft is supposed to move at all? side to side

thanks