• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Trans mount causing DS to hit safety loop? Help please

  • Thread starter Thread starter Marlboro_Man
  • Start date Start date Mar 21, 2006
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 21, 2006
#1
  • Mar 21, 2006
  • #1
First of all i did a search and didn't find what i was looking for.

Well after installing my lt's and driving it the first night i started to notice a little rattle/thunking coming from under the car during 1,2,3 gear acceleration. While fixing my o2 sensor the next day i noticed the driveshaft had been rubbing one of the bolts on the inside of my safety loop. It didn't appear to be very bad though. I tried moving the DS around to check for play in the u-joints and it seemed fine (I really don't know sh.it about u-joints though). So i looked at the tranny mount and it looked like it had seen better days. A couple weeks later now and the noise is still there, and more noticable when making a turn or accelerating mildly in 2nd gear.


Do you guys think that the mount would be the problem? If the mount is bad would it allow the tranny/DS to move enough to rub the inside of the safety loop? Or would you guys think it's more of a u-joint problem?

Anyone have a write up on replacing the tranny mount? I'm gonna go ahead and get a new mount from autozone since it's only ten bucks and see if i can replace it today.
 

The Fox

New Member
Mar 30, 2005
354
0
0
Port Elizabeth
Mar 21, 2006
#2
  • Mar 21, 2006
  • #2
Let us know how it goes. I really don't know what to tell ya. Maybe you could somehow change the mounting point of the safety loop?
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Mar 21, 2006
#3
  • Mar 21, 2006
  • #3
first of all what exactly is hitting the loop? is it the drive shaft weight or the actual shaft. If its hitting a bolt than just weld the loop together.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 21, 2006
#4
  • Mar 21, 2006
  • #4
The actual DS is hitting a bolt on the inside of the loop which holds the loop together. Welding it might be a good idea, unfortunatly the only way i can weld right now is with a coat hanger and an oxygen/acetelen torche lol.

I replaced the mount and sprayed some black paint on the drive shaft so i can look at it tommorrow and see if it hits it again.
 
You must log in or register to reply here.

Similar threads

S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
563
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
382
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
891
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?