• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tremec 3550 users have a look...

  • Thread starter Thread starter JungleJoe
  • Start date Start date Aug 20, 2011

JungleJoe

I was like well chit..Im missing something
Jul 25, 2011
184
7
18
Mo.
Aug 20, 2011
#1
  • Aug 20, 2011
  • #1
Ok, still working the bugs out of my car. It has a bad vibration, so I loooked at the trans and see its basically sitting on the crossmember. The mount is good, but look at the pic, the mount bolts are all the way to the back of the crossmember, anyone else have this problem, if so , what did you do to fix it? Sorry about the cell pics, but you get the idea....
I talked to Rick about this, just seeing if there is any other solution..
As far as the welds, is it the welds on the crossmember itself or on the crossmember mounts that are on the car itself??
 

Attachments

  • 1111111111.webp
    2.5 KB · Views: 152

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Aug 21, 2011
#2
  • Aug 21, 2011
  • #2
JungleJoe said:
Ok, still working the bugs out of my car. It has a bad vibration, so I loooked at the trans and see its basically sitting on the crossmember. The mount is good, but look at the pic, the mount bolts are all the way to the back of the crossmember, anyone else have this problem, if so , what did you do to fix it? Sorry about the cell pics, but you get the idea....
I talked to Rick about this, just seeing if there is any other solution..
As far as the welds, is it the welds on the crossmember itself or on the crossmember mounts that are on the car itself??
Click to expand...

There IS a trans mount right?If not get a prothane mount! As far as it sitting one way or another in the cross member dosent matter.BUT if your worried about it then cut the welds on the outer ends of the trans mount that are around the round ends and reweld it up.peace




john
 

JungleJoe

I was like well chit..Im missing something
Jul 25, 2011
184
7
18
Mo.
Aug 21, 2011
#3
  • Aug 21, 2011
  • #3
Yes, the trans mount is good. Its just the trans is sitting or should say touching the crossmember and causing a bad vibration....
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
320
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
488
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
2K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
978
Drivetrain Parts Sep 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?