tremec 5spd?

I have a 88 GT with a t-5 in it now but know nothing about it. It could be or factory if all i know. I have the ability to get a tremec 5spd out of a 99 cobra. I was wondering if anyone knew if it would bolt up to a 5.0 bell housing and or would the input shaft would work with my car. I would thank you all for any information I could get.
 
the t45 was used until 2001ish, where the 3650 took over.

all cobras got the 5 speed until 03/04 cobra's came, and those got the t56.

96-01ish - t45
01ish - present 3650
03/04 cobra- t56

99 should be the t45. that transmission will be nothing but a boat ancher to you, and it's not any better than the t5. No way, no how will it work on your fox.

that dude doesn't know what he's talking about. He says "t5" only because he knows just enough to get him in trouble, but not enough to know what his car is running. Don't waste your time, pass.
 
dsgoff32 said:
I have a 88 GT with a t-5 in it now but know nothing about it. It could be or factory if all i know. I have the ability to get a tremec 5spd out of a 99 cobra. I was wondering if anyone knew if it would bolt up to a 5.0 bell housing and or would the input shaft would work with my car. I would thank you all for any information I could get.

if you move it side to side in neutral and you hear the clunk under the car when you do it each time, then its a stock t-5.
 
Aliate X said:
if you move it side to side in neutral and you hear the clunk under the car when you do it each time, then its a stock t-5.


huh?? If you hear ANY clunk while moving it side to side on a t5, I highly suggest you yank that puppy for a rebuild.
 
v8only said:
man, I swear to you, i've never in my life heard that clunk, and I've been through a billion stangs and t5's. that's strange.


It doesnt sound like anything that isnt supposed to be there, it just sounds like it comes from under the car when you move it side to side in neutral.