tremmec tko

[trips52]

thinking of going with a tremmec tko... instead of the t5.... what do i need to do this conversion...... i know the bell housing,but what else do i have to get a new drive shaft...... or anything else....... thanks.........

 

[MatthewP]

You need a new clutch disk and either a new driveshaft or a new yoke for your old driveshaft because the spline count is different on both the input and output shafts.

-Matthew

 

[dwhiskie]

you can get the tko500 in both 10 and 26 spline input so you wont have to get another clutch disc but will need a different yoke for the driveshaft