Tri-ax install

they didnt give instructions with the shifter?

It's something that you can do yourself, all you need is an 8, 10, and 12mm socket. Maybe not even the 12, can't remember.

The triax comes with good instructions. Follow them step by step and you won't have a bit of problem.

I think the only thing that might be left off is how to get the console off. Unscrew the knob, push your finger on each side of the shifter and you will feel the plastic to hold on to. Then just pull up, the whole console comes off and snaps back in place.

You might need a buddy to help set the air / stop gap and maybe not. I have a hard time using two wrenches at once

It's a 45 min job for someone with no skills at all.

Thanks for fnsweet.com (Excellent garage section)

http://www.fnsweet.com/garage/shifter/index.shtml

http://www.fnsweet.com/garage/index.shtml