Trickflow H/C/I vs. AFR setup

[drakesdad]

well I am "super" happy with my results on the dyno and with the curves....I am going to get Grady's address and mail him a copy of the dyno so he can work his majic on comparing the auto set ups.......

 

[igotyofire]

Here's a link to my dyno graph of the 306 I had. AFR heads/Performer intake/HiTech Motorsport custom cam

http://www.californiafords.com/cgi-...ORNIAFORDS.COM/dyno/aaron_mike/aaron_dyno.jpg

vid too:
http://www.californiafords.com/cgi-bin/album.pl?album=VIDEOS/06_00_02

You made some good power man, is this what happens when you raise the compression? on our 302's I dont think 58cc heads alone give one 10:1 and so usually people have a tough time hitting the 300-320rwhp range it seems but usually those people just do plain out head swaps. I know yours in a little bit bigger bore but still.

 

[final5-0]

You made some good power man, is this what happens when you raise the compression? on our 302's I dont think 58cc heads alone give one 10:1 and so usually people have a tough time hitting the 300-320rwhp range it seems but usually those people just do plain out head swaps. I know yours in a little bit bigger bore but still.

I know for certain the 58 chamber AFR head on a stock block is not gonna give you 10 to 1

I went through all that stuff with Ed when I put my combo together.

Grady