Trickflow kit...are these parts to much for it

[xexitenglishx]

Well as in my sig i plan on getting a 255 fuel pump and 42# injectors with a larger mass air meter probably a C&L..Is this too much for the h/c/i..later on down the line..probably much later like a few years i plan to supercharge so im thinking ahead..What do you think? Would i need a FPR for this set up too? Thanks

 

[Daniel50]

42lb injectors are wayyyy to big for that setup. unless you are putting a s trim on there with high boost

 

[BaXTeR3221]

If your going to run a supercharger in the future, 42's are a good choice. However, i dont think i would run them for a couple of years on a street car unless you have some way to electronically tune it. Your going to have driveability and A/F ratio problems most likely.

 

[xexitenglishx]

They are big..but the mass air meter and computer will trim it down correct...i would just have room to grow? anyone else's opinion

 

[xexitenglishx]

And what size would you suggest getting then? 30#'s?

 

[5spd GT]

Even with a proper MAF for the bigger injectors they will run way to rich and give you some problems with starting and you will run very rich.

Don't go any bigger than 30lb injectors with a h/c/i setup like that...

Good Luck

 

[xexitenglishx]

hmmm..damnit i guess i got to return though 40's i got then..Unless anyone can convince me otherwise. haha..Thanks for your help

 

[squeeeg]

I would say 24# or maybe 30#. Definately nor 42#. Wait for when you get your s/c and they you will need the new injectors.

 

[HardmanGT]

Trick Flow recommends 24 or 30. Those 42's are too big. Unless you get a GOOD tuner that is willing to tune your combo with the 42's, get the smaller injectors.

 

[xexitenglishx]

Oh thanks alot guys

 

[Venom351R]

Im running #30's w/ 38 LBS of Pressure and its pig rich , need a dyno tune to see where Im at.

 

[frcefedlx]

I am running 30's and seems to run great but I will know for sure on the seventh . Going to the dyno . I would think with no power adder 24's would do the job.

 

[xexitenglishx]

Well i think ill go 30# right now which seem to still give me room to grow. Thanks

 

[89331SC]

if you want to run a chip and have someone tune it you can run the injectors without a problem. more is better than not enough. but on the other hand the cost of all that your prob better off just buying another set to use until you get the s/c

 

[xexitenglishx]

Yea thats what i figured...

 

[5spd GT]

Well i think ill go 30# right now which seem to still give me room to grow. Thanks

Well if you get the 30's (what I have) you still won't really have "room to grow" because let's say you add the supercharger...those will be to small. The 30's will be able to handle anything you can throw at it N/A with the 302 bottomend though...