I'm jealous, I have to wait until March 17th for our first test & tune at Gateway in Madison Illinois. We have two weekends of back to back test & tune from 8AM to 5PM. I'm hoping to get my car all lined out before the bracket racing points starts.
Right now I have the front suspension torn apart installing my 6 cyl springs and my 90/10 drag shocks. I started it this past Sunday and with the kids interrupting me every 5 minutes I only got one side partially done. I've been taking some pictures so I'll have a before and after on the stance. I cut one full coil off the 6 cyl spring and the car sits about 1/2" lower than my 620lb 1 " lowering spring with 1/3 coil cut off. (I threw the wheels on after I finished one side to check it out) Once I get them both done and it has time to settle it should be perfect, my front was a little too high with the 620's.
As soon as I get the springs done I have to pull my third member and get my new 4.11 gear installed. That is the part I am pumped about and I think it is going to help me improve on that 11.28. I would like to see an 11.0X before I move on to my next motor.
Good luck and can't wait to see those new times.
