Well it's almost here, just throwing this out to anyone in the area that might be interested. Myself and Vinyl66 are planning on going. This will be the first racing of the season at the track. Gates open at 6 and racing at 6:30-11pm. best $20 you'll ever spend....hope to see ya there..
I'm jealous, I have to wait until March 17th for our first test & tune at Gateway in Madison Illinois. We have two weekends of back to back test & tune from 8AM to 5PM. I'm hoping to get my car all lined out before the bracket racing points starts.
Right now I have the front suspension torn apart installing my 6 cyl springs and my 90/10 drag shocks. I started it this past Sunday and with the kids interrupting me every 5 minutes I only got one side partially done. I've been taking some pictures so I'll have a before and after on the stance. I cut one full coil off the 6 cyl spring and the car sits about 1/2" lower than my 620lb 1 " lowering spring with 1/3 coil cut off. (I threw the wheels on after I finished one side to check it out) Once I get them both done and it has time to settle it should be perfect, my front was a little too high with the 620's.
As soon as I get the springs done I have to pull my third member and get my new 4.11 gear installed. That is the part I am pumped about and I think it is going to help me improve on that 11.28. I would like to see an 11.0X before I move on to my next motor.