tuning with Moates

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,451
1,534
194
Maryland
Hi gents, it's been a while and I hope you all are well.

I had a bad injector a while back and had gone back to NA. In the near future I want to go back under boost. I now have new 42LB injectors and also had the MAF recalibrated and I have a data sheet for that. I have ready to utilize, Moates binary software and license, a Quarterhorse, Jaybird and an F3 chip.

I saw a literature available on eBay by Lasota Racing. I'm considering buying it and the cost is $80. Do any of you know about this literature and if so, what is your opinion on it? I want to learn everything I need to know and maybe even help others tune in the future. Do you think I should buy this and steep myself in it? Are there better options for me to train myself?

Thanks brothers :)

 
I’m finally getting under way with Quarterhorse tuning. It’s about time!

I’ve got my first a9L base loaded on the chip. Before I put it in the ECU and in the car I need to remove the FMU and associated adapter fuel lines, verify base timing, set back to factory fuel pressure (39psi) and double reset my base idle and related TPS voltage.

I’m going to tune NA first to familiarize myself then once I’m confident with everything I’ll put the blower back in and tune some more.

IMG_8019.webp


IMG_8020.webp
 
The YouTube playlist at Leech Motorsports is great stuff and I find it easier to follow than the text in the Lasota tuning literature. I’m sure as I learn the Lasota stuff will come clear quicker. For now, Leech is got me on the move.