Hey guys, well i basically suck gold! i picked up a card to pan ready to run 351 winsdor for 200$ and a 88 notchback fox with full interior and NO RUST whatsoever for 200$!(im lucky as Shhhhh..., i know) Well i got some questions. i already no what i need about swapping the 351 in so thats no problem. the plans that oink and i have are to get the engine in and then put my garrett t72 in.O and im not dealing with the EFI GARBAGE i already went through, im going blow-through carb.my qustion is should i tear the engine down get it cleaned honed and .030 over and just put low compression forged pistons in, new bearings,stock rods, stock crank?> i know the 69-74 blocks can take up to 800hp without breaking (studded obviously) or should i put new bearings in the shortblock leave all the stock internals,and spend all the money on heads?im using all arp studs,f cam,roller lifters,1.6 rr. I also plan on using a C4 or should i go C6?. leave whatever info u guys can aprreciate it in advance!