turbo questions

[ozonekiller]

ok im doing a single turbo {pro turbokit} i would like to know what injector size to run

 

[revhead347]

Going to need some more information.

Kurt

 

[Black95GTS]

850 CFM from Pro-Systems.

Adam

 

[4Jenna]

Most guys with 70mm or so turbos, basic strokers, h/c/i run 60's.

But like said without knowing motor combo, turbo size, and current fuel sys we can only guess.

The 60's can do well over 600rw np.

-Chris

 

[ozonekiller]

The engine has r/r, cai, under drives, and that is about it its a 70,000 stock engine. I have alum gt-40s and a trick flow street heat intake that will be installed we i head stud the engine oh i also have a stage 1 trick flow cam. i want to run 10 psi, the turbo is a t3/t4 garrett, 38mm waste gate, and a 50mm blowoff so i hope this helps.

 

[rio95]

The engine has r/r, cai, under drives, and that is about it its a 70,000 stock engine. I have alum gt-40s and a trick flow street heat intake that will be installed we i head stud the engine oh i also have a stage 1 trick flow cam. i want to run 10 psi, the turbo is a t3/t4 garrett, 38mm waste gate, and a 50mm blowoff so i hope this helps.

42's would be perfect and you can get ford racing ones. Many guys make 550rwhp on 42's. Many with only a single 255lph pump too.

 

[HankyGT]

just fyi ford racing rates their injectors at a lower brake specific (38# vs 42#) so your 42's are actually closer to 45+ and allows for a small window aswell.

If you are on a stock block, you will run out of block before injector with the 42s most likely.

 

[SVT-Sinister]

I have a 60mm single turbo on mine and my 42's are maxed out making 554RWHP. if i was you i would go with 80's

 

[ozonekiller]

Im looking to make 400ish so i would think #42 would work great from the sound of it. next question is tuning for 6 psi low boost and 10 or 12 psi.