• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Turbo Setup?

  • Thread starter Thread starter ry94stang50
  • Start date Start date Nov 20, 2013
Prev
  • 1
  • 2
First Prev 2 of 2

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Nov 21, 2013
#21
  • Nov 21, 2013
  • #21
ry94stang50 said:
Lol. Yeah that sounds like a really good setup. What trans are you running? I plan on a tko 500 if it can handle 400+ hp.
Did you install the turbo yourself or did you have a shop do it?
If you did it how was the install? Any problems and tips for me? I know you said better clamps. How about welding ? Did you have to weld anything or will clamps and rubber fittings hold up?
Click to expand...

In that video it was a mild built AOD i now have a Lentech AOD...i didnt install it had a shop do everything for me,they have installed a few they said it fit well...NO welding at all...i have all the on3 clamps and rubber couplers car sits outside all yr driven in rain...NEVER snow..lol..like i said everything seems to be holding up i just want the RPS clamps because i know these arent the best...but again i never did replace them yet either...lol...I really like the kit...i love the power!!!!!! car moves nice
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Nov 21, 2013
#22
  • Nov 21, 2013
  • #22
I don't want to be debbie downer here, and maybe i'm just too damn anal about the way things fit but i've installed 3 on3 kits to date and I have remade tubing pieces on each and every kit. do they work, yes. do they make good power, yes. have they been fairly reliable, so far from what i've see yes. I prefer a ball bearing unit over the journal bearing turbo but that's personal choice. End of the day they work, they are cheap and will make HP. I'm just kind of picky when it comes to how stuff fits and is why I custom make all of my own tubing for all the turbo or s/c builds I do.
 

ry94stang50

Member
Jun 21, 2013
427
12
19
Brick, NJ
Nov 21, 2013
#23
  • Nov 21, 2013
  • #23
In all honesty I just want a turbo for the waythe car sounds lol. The kit is cheap. And ththat's good. I can allways upgrade the turbo right? Wouldn't I be able to swap it in there directly? Same with the intercooler if I wanted a better one I just swap them out right?
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Nov 21, 2013
#24
  • Nov 21, 2013
  • #24
You want a turbo kit for all of the wrong reasons, I hate to say it. Lets think about this responsibly for a second. Buy a cheap kit, upgrade the turbo, intercooler, wastegate and blow off valve then where are you at dollars and cents wise? The same place if not more money out of pocket than a good kit with good parts to begin with. I in no way mean to be rude here, but:

FOCUS
!
 
Reactions: f8tlfiveo and A5literMan

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Nov 21, 2013
#25
  • Nov 21, 2013
  • #25
Ry if you want a turbo kit and want it cheap buy the on3 kit. Have it installed professionally and enjoy it. Seems there is a good chance you'll change your mind about the car by then anyway, idk why I think that
 
Reactions: elarm1 and 84Ttop

ry94stang50

Member
Jun 21, 2013
427
12
19
Brick, NJ
Nov 21, 2013
#26
  • Nov 21, 2013
  • #26
Lol I was already thinking about just waiting and getting it all done together. Just give the car to the shop rebuild the engine and unstall the turbo if I go to the right shop it shouldn't be a problem.
 
Reactions: A5literMan

ry94stang50

Member
Jun 21, 2013
427
12
19
Brick, NJ
Nov 21, 2013
#27
  • Nov 21, 2013
  • #27
My buddy knows a local guy who builds mustangs and fords and I can get him to do the work cheap. Idk about the turbo though. But I'm sure he can do it.
 

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Nov 21, 2013
#28
  • Nov 21, 2013
  • #28
Hope you get it done! Will be badass if you do. None of the new "stock" cars will hang with you
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Nov 21, 2013
#29
  • Nov 21, 2013
  • #29
You can buy a thing to hook on your exhaust to make it sound like turbo...
 
Reactions: krazedstang, ry94stang50 and MikeH686

ry94stang50

Member
Jun 21, 2013
427
12
19
Brick, NJ
Nov 22, 2013
#30
  • Nov 22, 2013
  • #30
85rkyboby said:
You can buy a thing to hook on your exhaust to make it sound like turbo...
Click to expand...
And why would anybody do that? Lol
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Nov 22, 2013
#31
  • Nov 22, 2013
  • #31
ry94stang50 said:
And why would anybody do that? Lol
Click to expand...
Because ppl want the sound of the turbo without the problems, money, tuning, etc... Same reason kids put cards or cans on the back tire of there bikes.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Nov 22, 2013
#32
  • Nov 22, 2013
  • #32
I guess I really got lucky have my car together almost going on 3 yrs with my set-up seems great no problems with it...I went thru a trans ...I installed a c4 didn't like it went back to lentech AOD...other the trans problems...the car has run like a champ...
 
Reactions: 85rkyboby

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Nov 22, 2013
#33
  • Nov 22, 2013
  • #33
MY 85 GT said:
I guess I really got lucky have my car together almost going on 3 yrs with my set-up seems great no problems with it...I went thru a trans ...I installed a c4 didn't like it went back to lentech AOD...other the trans problems...the car has run like a champ...
Click to expand...
Would you consider a 5 speed? I plan on building a turbo setup next and am RACKING my brains trying to figure out tranny options Ha.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Nov 22, 2013
#34
  • Nov 22, 2013
  • #34
No never would I use a stick in my car I love the 3000 stall convertor...Manual VB AOD it is a monster...it just kick ass...build boost never looses any boost thru shifting...autos just are awesome with a turbo, Turbos love the load of an auto trans...
 
Reactions: A5literMan

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Nov 22, 2013
#35
  • Nov 22, 2013
  • #35
MY 85 GT said:
No never would I use a stick in my car I love the 3000 stall convertor...Manual VB AOD it is a monster...it just kick ass...build boost never looses any boost thru shifting...autos just are awesome with a turbo, Turbos love the load of an auto trans...
Click to expand...
Ok, that makes sense you would lose boost while shifting.. What problems did you have with the c4?
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Nov 22, 2013
#36
  • Nov 22, 2013
  • #36
85rkyboby said:
Ok, that makes sense you would lose boost while shifting.. What problems did you have with the c4?
Click to expand...

It was a great trans nothing wrong with it performance wise but the with only 3spds you really cant go cruising on the highways...that's why I went back to AOD I missed the OD now I can cruise on the highway again at 2000 rpms...were with the c4 at 55-60 I was a little over 3000 rpms...for all out Racing the c4 is awesome but for a street/sometimes a track car I will stick with the AOD....
 

85rkyboby

Active Member
Mar 2, 2011
923
96
39
South ATL
Nov 22, 2013
#37
  • Nov 22, 2013
  • #37
MY 85 GT said:
It was a great trans nothing wrong with it performance wise but the with only 3spds you really cant go cruising on the highways...that's why I went back to AOD I missed the OD now I can cruise on the highway again at 2000 rpms...were with the c4 at 55-60 I was a little over 3000 rpms...for all out Racing the c4 is awesome but for a street/sometimes a track car I will stick with the AOD....
Click to expand...
Oh ok, I didn't think about that. That's important for a daily driver for sure! I was reading something about people using the case of one and the gears of another because one of those auto's has a first gear that's pretty steep which isn't necessary.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
869
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
606
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
250
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
720
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?