Turn signal help plz......

[Makdaddymac]

my left front turn signal does not work....all others do....even the left rear....i get a clicing noise @ a faster tempo but no Left arrow light in the dash....I replaced the bulb(the old one looked fine) and still nothing...put a test light up to and get nothing except from one (and thats when the headlights are turned on!!) whats my problem...a fuse,,but why would all except front work.....flasher,again i still et clicking noise and all others work....
ps. right side signals are perfect...but left front dont work and left rear blinks faster....WTF...this simple project is making look like this guy>

 

[FivePointStang]

my left front turn signal does not work....all others do....even the left rear....i get a clicing noise @ a faster tempo but no Left arrow light in the dash....I replaced the bulb(the old one looked fine) and still nothing...put a test light up to and get nothing except from one (and thats when the headlights are turned on!!) whats my problem...a fuse,,but why would all except front work.....flasher,again i still et clicking noise and all others work....
ps. right side signals are perfect...but left front dont work and left rear blinks faster....WTF...this simple project is making look like this guy>

Take your new bulb out and make sure nothing got lodged in the connection. Blow it out with a compressor if you have one.

 

[bakos24]

Are all you back lights working on the driver side? Reason I ask on mine, my one brake light went out on the driver side which cased the driver side turn signal to blink real fast, including the front turn signal. I replaced the back light and worked fine. I would check those out.

 

[Makdaddymac]

ok i will check that....but i my in dash arrow dont blink when i turn the left siganl on....and when the hazards on are on...then all lights blink except the left front(aka.my problem child)..so im assuming my break lights work fine....

 

[AntL97Cobra]

Might be a bad connection in your multi-fuction switch (hazards, sign signals, high beam) I had the same issue with mine, the left side wouldn't work all the time and the brake light was out sometimes. If I would jiggle the hazard button around it would usually start to work. I ended up replacing the whole assembly last winter and now it's great. If you do it just remember there are 5 screws holding on the plastic column piece, one that I don't even know how you are supposed to get to on the right side past the knee panel.