Turn signals stopped working

[Scudly]

The other day my turn signals just stopped working. The interior turn signal does not show blink, the outside ones don't either. Everything else is fine thankfully, break lights work, headlights work.

I called my dad and he said it was more than likely a burnt fuse. I kinda know where to look, but I am not to sure. Does anyone have a wiring diagram, or an idea?

If I am vauge please tell me so i can provide more info.

 

[Ronstang]

Check the flasher unit.....it is under the dash on the driver's side stuck in a little clip that is screwed on the vent housing.

 

[Rerun]

Check your hazards switch and make sure you don't have any wires that have come out of the back of the switch; after checking the fuse of course.

Good luck.

 

[Ronstang]

641/2s do not come with hazard flashers standard.....and he doesn't have the option either.

 

[Rerun]

Wow wasn't even paying attention, in my own little world over here at 2AM thinking everyone has my car. Sorry man, Ignore me.

 

[1967coupe]

I had the same exact problem with my '67. I ended up having to replace the switch.

 

[Pakrat]

If the 64 1/2 has a signal cam like the others behind the steering wheel, that is a likely cause. Don't get the cheap rebuild cam if it is, they aren't worth it, spend the little extra for a new one.