Tweecer datalogging issue

jwalker

Founding Member

Aug 4, 2002

405

0

0

millersville,pa

Mar 13, 2006

#1

• Mar 13, 2006

• #1

I cant seem to datalog. I followed the instructions in the Tweecer tuning manual listed in the first sticky. Nothing seems to happen. It says it is datalogging, but then the dash board never moves and when I try to read the data file, it just says its empty.

I just started using the Tweecer so I am new at this. I have used Cal Edit and it works fine.

Thanks,

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Mar 13, 2006

#2

• Mar 13, 2006

• #2

Jeff

I'm not that familiar with your version of software but check to see if you have done these two things.

In Cal Edit you will find a place to select if you want to dlog or not

In Cal Edit you will need to build your payload of items to dlog

Grady

 

jwalker

Founding Member

Aug 4, 2002

405

0

0

millersville,pa

Mar 13, 2006

#3

• Mar 13, 2006

• #3

yep did all of that.

My Cal Edit version is1.20B3

Do I need to phisically drive the car or can I just let it idle?

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Mar 13, 2006

#4

• Mar 13, 2006

• #4

OK Jeff

1.20 I can relate to

You should see real time data at idle like rpm if that is one of your payload choices.

In your payload window you check 1 to 16 items and then click the Payload button and your choices will go blank.

Anytime you change your payload you will have to upload to the Tweecer. You may want to load to all 4 switch positions.

Grady

 

jwalker

Founding Member

Aug 4, 2002

405

0

0

millersville,pa

Mar 13, 2006

#5

• Mar 13, 2006

• #5

Ok I will try this for all 4 positions and see if it works.

Thanks
Jeff

 

jwalker

Founding Member

Aug 4, 2002

405

0

0

millersville,pa

Mar 13, 2006

#6

• Mar 13, 2006

• #6

didnt work. I tried it at lunch. I made all 4 switch positions the same settings and nothing. The button on the buttom of the Cal Can screen is green and I see it change to red when I hit "stop datalogging"

Not sure what this issue is.

Jeff

 

DADDYJUSTANG

Founding Member

May 23, 2001

213

1

18

MANDEVILLE,LA

Mar 20, 2017

#7

• Mar 20, 2017

• #7

I know it's been a while , but did you ever figure out your problem? I seem to have the same issue. I load a payload , save the file , write to tweecer. Then when I turn on calcon it says no payload selected. I get a green data light and a ding-dong sound when I turn the key on but no gauges. I have tried numerous times in different ways. I've made different payload files. Kinda at a loss.

 

General karthief

wonder how much it would cost to ship you a pair

20+ Year Stangneter

Aug 25, 2016

27,955

10,598

203

polk county florida

Mar 20, 2017

#8

• Mar 20, 2017

• #8

10 year old thread?

 

DADDYJUSTANG

Founding Member

May 23, 2001

213

1

18

MANDEVILLE,LA

Mar 21, 2017

#9

• Mar 21, 2017

• #9

Does it really matter how old the thread is? Information is still information.

 

General karthief

wonder how much it would cost to ship you a pair

20+ Year Stangneter

Aug 25, 2016

27,955

10,598

203

polk county florida

Mar 21, 2017

#10

• Mar 21, 2017

• #10

Let me hit up @vristang about your question. He has a thread in the tech section on tweecer stuff

 

Reactions: DADDYJUSTANG

vristang

15 Year Member

Mar 31, 2005

4,933

101

124

Seattle

Apr 13, 2017

#11

• Apr 13, 2017

• #11

Wish I had seen this sooner...
Sorry, but I haven't used a tweecer since before this thread was started.

Try making sure that the data template files are not corrupted, and in the right locations. I seem to remember having issues like this after 'organizing' some folders. But then again, that may have been with a QH... it was just too long ago.

Maybe a bump will get others chiming in