Twin kit progress pics.

TT91 · Nov 25, 2005

sweet, got my name changed...

strokedandblown · Nov 25, 2005

sweet good job your buddy Mraubrn help you

5.0Grunt · Nov 25, 2005

TT91 said:
sweet, got my name changed...

LOL,,why TT91? better yet why sirsureshot?,,,good luck with the new cam

TT91 · Nov 25, 2005

sirsureshot39 was my old screen-name on aol, and when I first joined stangnet, it asked me for a username, and me being the dumbass that I am, entered my s-name instead of something mustang related. I finally got it changed, simple, yet effective. Twinturbo 1991

5.0Grunt · Nov 25, 2005

TT91 said:
sirsureshot39 was my old screen-name on aol, and when I first joined stangnet, it asked me for a username, and me being the dumbass that I am, entered my s-name instead of something mustang related. I finally got it changed, simple, yet effective. Twinturbo 1991

I like it Any track times with the twin turbo set up?

TT91 · Nov 25, 2005

5.0Grunt said:
I like it Any track times with the twin turbo set up?

nope, not on 8 cylinders at least.

Rick 91GT · Nov 26, 2005

Mike, what timing set was it? I'd recommend a Rollmaster or Crane billet (Crane Billet is a RED Rollmaster) with the brass shim and a Ford billet steel plate, Or you can machine the plate for a roller bearing set-up or Danny Bee I believe makes one for your block.

Good Luck!

TT91 · Nov 26, 2005

Rick 91GT said:
Mike, what timing set was it? I'd recommend a Rollmaster or Crane billet (Crane Billet is a RED Rollmaster) with the brass shim and a Ford billet steel plate, Or you can machine the plate for a roller bearing set-up or Danny Bee I believe makes one for your block.

Good Luck!

Trick flow billet set, heres the link.

http://store.summitracing.com/defau...rchinresults=false&N=115&target=egnsearch.asp

Part number-TFS-51478520

I havnt ordered a new one yet because Im looking for something thats proven. The trick flow one had the thrust plate bearing. I had good luck with the pete jackson gears, but Job doesnt like them. Do you have a part number for the ford thrust plate?

Rick 91GT · Nov 26, 2005

FMS-M-6269-A351 Ford Racing Thrust Plate, Steel, Ford, Small Block Windsor/ 351/ SVO $48 at Summit.

I have not had an issue with the Rollmasters other then they fit the crank really tight, a little work with some emory clith takes care of that. They hold up to serious power and abuse, the chains are really nice.

You may want to think about dual pinning that cam while the motor is apart, you will need to drill the timing gear, I do this on big blower cars...with the turbo now thinking about it you may be fine.

TT91 · Nov 26, 2005

Rick, thanks for the part number, however when I spoke to someone at summit a few days ago, they said that the piece above isnt designed to fit the 302 motor. And looking at it, isnt there supposed to be an oil passage in there? Seen in this piece. CCA-3120TB

TT91 · Nov 26, 2005

I came up with this part number at Jegs.397-M-6269-A351

Rick 91GT · Nov 26, 2005

TT91 said:
Rick, thanks for the part number, however when I spoke to someone at summit a few days ago, they said that the piece above isnt designed to fit the 302 motor. And looking at it, isnt there supposed to be an oil passage in there? Seen in this piece. CCA-3120TB

The picture they haven't isn't correct but it looks just like the stock piece, oil passage and all. I just used it on a DART block motor, and I have one on mine as well.

The TFS piece looks decent for $70, the Crane is $99 but allows more adjustment.

Rick 91GT · Nov 26, 2005

Same PT however Summit uses FMS as the prefix, and JEGS uses 397

TT91 · Nov 26, 2005

Danny Bee makes a nice piece. Jegs-294-1510

Thanks so far.

mattkimsey · Nov 26, 2005

you changed your name....it just doesn't seem right.

TT91 · Nov 26, 2005

mattkimsey said:
you changed your name....it just doesn't seem right.

Im sorry..the other one is years old, time for a change.

Rick 91GT · Nov 26, 2005

Yeah the Danny Bee piece is nice, We used one on a A4 block that had a wide bolt pattern plate since it had 52mm roller cam bearings. Had to machine on the timing chain a little but it went together nice.

TT91 · Nov 27, 2005

Rick 91GT said:
Yeah the Danny Bee piece is nice, We used one on a A4 block that had a wide bolt pattern plate since it had 52mm roller cam bearings. Had to machine on the timing chain a little but it went together nice.

Rick, im running the A4 block, from reading your post, it sounds as if it has different the stock measurments. ??

Rick 91GT · Nov 27, 2005

Only if you have roller cam bearings

TT91 · Nov 27, 2005

Rick 91GT said:
Only if you have roller cam bearings

Sure dont, thanks. I think Ill go with the danny bee piece for a peace of mind.
Who sells the rollmaster unit?

Twin kit progress pics.

Active Member

Banned

Banned

Active Member

Banned

Active Member

Mustang Master

Active Member

Mustang Master

Active Member

Active Member

Mustang Master

Mustang Master

Active Member

I've compiled a list to recap this thread:

Active Member

Mustang Master

Active Member

Mustang Master

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency