So I have a good opportunity to buy two borg Warner s300 turbos for pretty dirt cheap and was wondering if you guys could help me out with the exhaust housing part. The specs on the turbo are as follows:
Exhaust wheel inducer 73 exducer 64
Compressor wheel 63 inducer. 92 exducer.
Exhaust housing AR is .48
I found online a .91 AR housing for this turbo that fits the exhaust wheel. My question is will this housing be too big for a twin setup?
347 8.5 looking to make 600 to the wheels on around 10 lb of boost.
Let me know what you guys think both turbos are brand new
Exhaust wheel inducer 73 exducer 64
Compressor wheel 63 inducer. 92 exducer.
Exhaust housing AR is .48
I found online a .91 AR housing for this turbo that fits the exhaust wheel. My question is will this housing be too big for a twin setup?
347 8.5 looking to make 600 to the wheels on around 10 lb of boost.
Let me know what you guys think both turbos are brand new
Last edited: