• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

typhoon or gt40?

  • Thread starter Thread starter aleborjas
  • Start date Start date Oct 27, 2005

aleborjas

New Member
Sep 11, 2005
610
0
0
Oct 27, 2005
#1
  • Oct 27, 2005
  • #1
typhoon or gt40? its for a 306 185's heads i know that the typhoon has to be little polished on the runers but i dont think gt40 is worth the price...crapola
 

carbed87

Member
Jun 5, 2005
215
0
16
Oct 27, 2005
#2
  • Oct 27, 2005
  • #2
heh, so we meet again...

if i were you (imo) i would stay away from proffesional products. think about it... you drive an american musce car, and i take it you're against imports right?

wether you are or not isn't the point, the point is... prof. prod. is a knockoff brand made in ***in china, and you're car is made in america.... see how that doesn't work... im not dissin on the typhoon or anything, but the thing is... well... its made in china man...cmon


as far as comparing... i LOVE my gt40 intake... it came with the car, but still... i love it, anyways if you think that the gt-4o intake isn't worth the moola, than wy not try that new bbk ssi intake, i've heard nothing but great things about it... and it comes with fuel rails too!...sweet!
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Oct 27, 2005
#3
  • Oct 27, 2005
  • #3
edelbrock rpm

Not a big fan of Knock off products either.

I don't know if PP makes a knock off of the rpm like they do of the performer.

Gt40 is a very good all around intake, makes more average hp and torgue then most others. But as you said it is costly.
 

95COBRA241

New Member
Sep 3, 2005
339
0
0
Delray Beach, FL
Oct 27, 2005
#4
  • Oct 27, 2005
  • #4
Personally, I'd buy a GT40 or a "real" Edelbrock before I buy a copy.
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
Oct 28, 2005
#5
  • Oct 28, 2005
  • #5
anything else that suits your motor other than a crappy knock off.
 

aleborjas

New Member
Sep 11, 2005
610
0
0
Oct 28, 2005
#6
  • Oct 28, 2005
  • #6
wich one is good and cheap and it can work for stroker for a future mod?
 

795.0pacecar

lover of pudgy polygamists
Jul 11, 2003
480
0
17
Senoia, GA
Oct 28, 2005
#7
  • Oct 28, 2005
  • #7
Look for some good name brand stuff on ebay. I got a trick flow track heat intake manifold with a 70mm BBK EGR spacer for $325 shipped and its pretty much in perfect condition.
 
N

nxb88

New Member
May 12, 2003
53
0
0
Alexandria, VA
Oct 28, 2005
#8
  • Oct 28, 2005
  • #8
I went ahead and threw down the dough to get a GT-40 n threw on a 1" spacer with it, and @ the same time a 70mm tb and egr spacer...now i havent yet down cams or heads, and in that case some people say they wouldnt notice a difference, once i got it all together and took it out a noticed a very reasonable difference and couldnt get enough of it, and this is with multiple codes being pulled and a nasty idle problem...so i say go for it, nobody knows your car better than ford anyway, and you pay for what you get
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 28, 2005
#9
  • Oct 28, 2005
  • #9
2000xp8 said:
I don't know if PP makes a knock off of the rpm like they do of the performer.
Click to expand...
Actually, the Typhoon is a knock off of the Edelbrock Performer RPM. I have one actually, and it seems as though they're hit or miss with their quality. I was fortunate with mine being pretty good, although the injector bosses leave a little to be desired, since I'll have to remove some casting flash from them.
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
Oct 28, 2005
#10
  • Oct 28, 2005
  • #10
i heard stories that if you try to put boost through the knock off intake that the seals on the upper plenum will leak rather easily.
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Oct 28, 2005
#11
  • Oct 28, 2005
  • #11
Putting all the other stuff aside, the Typhoon will out perform the Cobra/Gt40 intakes hands down. It's no contest.
 

blackstangt

Member
May 31, 2004
460
1
19
ny
Oct 28, 2005
#12
  • Oct 28, 2005
  • #12
i have the typhoon, there's no dip in the thermostat housing to allow you to adjust the distributor easily, the inside should be cleaned up and it doesn't come with an oil shield for the lower intake, so oil pushes it's way up the pcv into the upper intake. But if you can use a shield off the stock one...(not sure you can) and are good at finding tdc with dist out(so you can adjust with less room)... and want to port or polish it anyway, it is a good intake. it definately outperforms the gt-40/cobra up high, and about matches it down low, so if the price is right, which it was for me, go for it,but if you want to spend a little more, to save a lot of hassle, go with the performer or rpm from edelbrock, they are much better quality, even though they give about the same performance.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Oct 28, 2005
#13
  • Oct 28, 2005
  • #13
Typhoon will not "leak" under boost or NOS...yes the intake is made in china..Ford racing has followed suit with it's cobra intake..and I would not be surprised if the GT40 followed suit. I like the Typhoon, it serves my engine well in both looks and performance (matching that of my RPM..no difference). GT40 is one hell of a good intake, tests show it carrying it's weight well against the biggest and newest compeditors. For my case the Typhoon served my needs for what my car is..some show/good go, but if just for the GO factor I think the GT40 would make better power down low and just as much through the mid and upper...I like it and would recomend that one for you.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Oct 29, 2005
#14
  • Oct 29, 2005
  • #14
I'm wondering why you're asking this damn question. You don't need either of hose. You've asked before a couple times and you've got good answers. Get a TFS R or an RPM II if you're gonna do the 347. If you're staying 306 get a Track Heat.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Oct 29, 2005
#15
  • Oct 29, 2005
  • #15
when i get more money down the line i plan to buying a typhoon and port matching and cleaning it up, and then call it a day....
 
You must log in or register to reply here.

Similar threads

Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
589
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
X
Engine Brackets for Gt40 heads with ac and ps?
  • Xavierg208
  • Nov 14, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
530
Fox 5.0 Mustang Tech Nov 16, 2025
limp
Fox Good shop in Washington state or Oregon
  • keel
  • May 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
186
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
keel
Progress Thread Block transplant (and more)
  • JD1964
  • Apr 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 21 22 23
Replies
448
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Friday at 5:49 PM
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?