i have the typhoon, there's no dip in the thermostat housing to allow you to adjust the distributor easily, the inside should be cleaned up and it doesn't come with an oil shield for the lower intake, so oil pushes it's way up the pcv into the upper intake. But if you can use a shield off the stock one...(not sure you can) and are good at finding tdc with dist out(so you can adjust with less room)... and want to port or polish it anyway, it is a good intake. it definately outperforms the gt-40/cobra up high, and about matches it down low, so if the price is right, which it was for me, go for it,but if you want to spend a little more, to save a lot of hassle, go with the performer or rpm from edelbrock, they are much better quality, even though they give about the same performance.