Underdrive Pullies Help!!

[66Stangs93]

Does anyone know the correct socket/allen wrench size for removing the stock pullies on a 93 LX. And in order to change them will have to remove the radiator and fan? OORAH!!

 

[93tealstang]

I'm not completely sure but I think a 14mm socket will work. Or else a phillips head screwdriver. No need to remove anything either.

 

[88stangmangt]

I'm not completely sure but I think a 14mm socket will work. Or else a phillips head screwdriver. No need to remove anything either.

no sir, you think you can get a socket wrench or screw driver in with the fan and junk still on? i had to take mine out with the shroud to get a socket wrench in there. and it was still PITA.

 

[93tealstang]

Yes sir, I have done them both. I didn't need to remove anything. Then again I'm mainly stock. I have done it though.

 

[89MustangGX]

Yes sir, I have done them both. I didn't need to remove anything. Then again I'm mainly stock. I have done it though.

How did you take the water pump pulley off without taking the fan off? I'm curious, could save me alot of time.

 

[Icepick]

lol, good one Kind of hard to change the water pump pulley without taking the fan and shroud off.

 

[87'GTstang]

lol, good one Kind of hard to change the water pump pulley without taking the fan and shroud off.

You don't have to remove the shroud. After taking the belt off then remove the 4 bolts attatching the fan's hub to the pulley and slide it to the side.