• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

unmetered air???

  • Thread starter Thread starter 86turbo
  • Start date Start date Sep 23, 2008

86turbo

Member
Apr 8, 2006
183
0
17
Sep 23, 2008
#1
  • Sep 23, 2008
  • #1
hey guys i have an 85 coupe that i just put an efi 302 in. I have the nipple on the valve cover capped off but i have an open breather element in the rear of the intake where the pcv usually goes.......

anyone done this?

Drew
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Sep 24, 2008
#2
  • Sep 24, 2008
  • #2
If you have the nipple on the VC capped as well as the nipple on the throttle body and you do not have the PCV connected to the vacuum port on the underside of the intake then you should not have an unmetered air issue. You would only have an unmetered air issue if you were running a pcv system connected to a vacuum port on the underside of the intake. This would allow the engine to pull air through the breather on the VC through the PCV system thus bypassing the MAF.

That said have in just a breather in place of the PCV valve is not the best setup for evacuating corrosive gasses from the crankcase.
 

86turbo

Member
Apr 8, 2006
183
0
17
Sep 24, 2008
#3
  • Sep 24, 2008
  • #3
thats exactly what i thought, just wanted to double check. The breather isnt enough to evac the crankcase??? I have a catch can with the same size breather on my turbo 5 liter and even with seeing some blowby ive never had the vc gaskets blow out or anything.......elaborate please.

Drew
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Sep 24, 2008
#4
  • Sep 24, 2008
  • #4
The PCV system evacuates the crankcase by drawing in clean, metered air and expelling it through the PCV into the intake plenum where it's burned, versus introduced into the atmosphere. A breather system only allows the crankcase to remain at atmospheric pressure, but doesn't introduce clean air into play. Either one works, but the PCV system is more efficient.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Sep 25, 2008
#5
  • Sep 25, 2008
  • #5
StangGT1995 beat me to it. But he is exactly right.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Sep 26, 2008
#6
  • Sep 26, 2008
  • #6
86turbo said:
thats exactly what i thought, just wanted to double check. The breather isnt enough to evac the crankcase??? I have a catch can with the same size breather on my turbo 5 liter and even with seeing some blowby ive never had the vc gaskets blow out or anything.......elaborate please.

Drew
Click to expand...
The fact that the VC hasn't blown a gasket, doesn't tell you much.

Put a vac gauge on the crankcase and go for a drive
 
You must log in or register to reply here.

Similar threads

S
Brakes 80 Mustang 4.2 rear chassis brake line for 5 lug conversion!
  • StangPowerLSX510
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
182
Fox 5.0 Mustang Tech Aug 9, 2026
limp
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
370
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
A
Engine Genius installed oil filler above rocker arm…
  • afjLX
  • Mar 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
666
Fox 5.0 Mustang Tech Mar 29, 2025
nicholase
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
9
Will I feel a difference
  • 90Stanger302
  • Mar 12, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
379
1965 - 1973 Classic Mustangs -General/Talk- Apr 13, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?