• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Up In Smoke !!!!!!

  • Thread starter Thread starter Rjaaaaaa
  • Start date Start date Apr 16, 2017
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Apr 16, 2017
#1
  • Apr 16, 2017
  • #1
So I was working on my busted up hood doing some final sanding and prime, while the paint was drying I decided to take stang out for a little joy ride on a nice 75 degree day. Made a 20 minute run and was about 2 miles from home and I smelled a little gas, then I saw a little vapor spray out from in front of the intake. Before I could get it stopped BOOM !! a giant fireball flashed up in the front of the engine and then it flared up at the firewall. Gas must have rolled back on the intake. I jumped out and ripped of my tee shirt an proceeded to try and smother the fire but some of the wiring was already burning, wires to dist. plug wires etc. (no fire ext. in car ) Kept fire at bay for awhile but then my shirt caught on fire and I was out of business. I was sure the car was going to burn to the ground, then the heater hose burned through and sprayed on the fire at the firewall and really slowed it down (thank you LORD) . A friend pulled up who had a fire ext. and I was able to put the fire out.
Another 10 minutes and I think I my have lost the car. Looks like I'll need a new dist. and wires. I'm not sure what happened, something around the #5 injector or fuel rail. Thanks to the fact that I had cleaned up the engine comp. most of the wiring on the firewall was tucked away, there was some burning of wires but it is just in the center of the wire run, should be able to splice them through. Also burned some vac hoses but this is all an easy fix.
I'll have to pull the engine but that's ok at least the car is good. Only problem is I just got out of a week's stay in the hospital so it's going to be awhile before I will be able to do anything. Bummer. I'm looking for someone that I could pay for a day to crawl under the car and get everything lose to pull the engine, I can work on it if it's out I just can't get up and down under the car. Remember I'm 68 years old and most of my friends and neighbors are older.
My camera battery was dead some I'll have to get some tomorrow.
If it weren't for bad luck, I'd have no luck at all.
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,739
3,188
203
Taylorsville ky
Apr 16, 2017
#2
  • Apr 16, 2017
  • #2
Hate to hear that... I'm glad you are ok,and for the most part-the car is ok.
Small blessing the hood was off though right? Lol
Hopefully it won't sit long and you can go back to cruising
 
Reactions: A5literMan

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Apr 16, 2017
#3
  • Apr 16, 2017
  • #3
man that truly sucks.. Glad to hear that you are ok.. Cars can be fixed or replaced.
 
Reactions: A5literMan

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,915
10,565
203
polk county florida
Apr 16, 2017
#4
  • Apr 16, 2017
  • #4
Man your car is hard on you! Glad its not terminal and your ok.
Where you out of, your profile don't say, if it's a secret pm me I won't tell nobody.
 

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Apr 16, 2017
#5
  • Apr 16, 2017
  • #5
Man I have been there. I hope the damage is to extensive. Sorry bro.
 

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Apr 16, 2017
#6
  • Apr 16, 2017
  • #6
karthief said:
Man your car is hard on you! Glad its not terminal and your ok.
Where you out of, your profile don't say, if it's a secret pm me I won't tell nobody.
Click to expand...
I'm near Gettysburg, Pa.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Apr 16, 2017
#7
  • Apr 16, 2017
  • #7
Stories like that are the reason I always keep a small fire extinguisher in my mustangs. I hope that if that ever happens that I'll be able to get it out.

Glad your car didn't burn to the ground. The heater hose putting the fire out....you are lucky.
 
Reactions: hoopty5.0 and A5literMan

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,915
10,565
203
polk county florida
Apr 16, 2017
#8
  • Apr 16, 2017
  • #8
Damn, I was ready to grab my channel lock pliers and pipe wrench and head your way but thats a trip. Sorry brother.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Apr 16, 2017
#9
  • Apr 16, 2017
  • #9
I really hope someone here helps you out. If I was closer I'd be there.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,250
17,934
224
Massachusetts
Apr 17, 2017
#10
  • Apr 17, 2017
  • #10
That sucks

Man, I really need to put an extinguisher in my car
 
Reactions: FoxMustangLvr

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,915
10,565
203
polk county florida
Apr 17, 2017
#11
  • Apr 17, 2017
  • #11
Makes you think don't it?
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Apr 17, 2017
#12
  • Apr 17, 2017
  • #12
Adding fire extinguisher mod (non-ricer style) ASAP!
 

droopie85gt

Hookers and Beer for life!
5 Year Member
Dec 26, 2016
1,028
818
153
Cordova, TN
Apr 17, 2017
#13
  • Apr 17, 2017
  • #13
Damn....rough day! Glad to hear it wasn't worse. If you weren't 15 hours away, I'd help you out!
 

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Apr 20, 2017
#14
  • Apr 20, 2017
  • #14
so here we are with some photos. I think I found some one to help me get the engine out but i'm going to wait a week or so then I will be a little stronger.
Do you think I should just replace the dist. with a stock unit, that's all that was in it?
 

Attachments

  • DSCN0560.webp
    583.3 KB · Views: 229
  • DSCN0561.webp
    607.1 KB · Views: 225
  • DSCN0562.webp
    473.9 KB · Views: 220

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,739
3,188
203
Taylorsville ky
Apr 20, 2017
#15
  • Apr 20, 2017
  • #15
I vote stock distributor-and powder coating for the other parts
 

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Apr 20, 2017
#16
  • Apr 20, 2017
  • #16
Rjaaaaaa said:
so here we are with some photos. I think I found some one to help me get the engine out but i'm going to wait a week or so then I will be a little stronger.
Do you think I should just replace the dist. with a stock unit, that's all that was in it?
Click to expand...


Man this brings back some dark memories


Just take you time and rip it off like a bandaid. You'll feel better once you are putting it back together.

Remember don't get discouraged when you are redoing your work. It could of been worse and it's fixable. Good luck my friend.
 
Reactions: 90sickfox

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Apr 20, 2017
#17
  • Apr 20, 2017
  • #17
That car was so nice. I really like how you worked the shades of blue. First the hood...and now this.

Sounds like you're ready to get back at it again. All you need is a stock replacememt distributor. No need for any fancy billet aluminum...unless you just like bling.

You've got to get that car back up and running.
 
Reactions: Black1987

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Apr 24, 2017
#18
  • Apr 24, 2017
  • #18
thanks guys for the encouragement, I'm feeling stronger everyday and I've got some new ideas for the motor so it won't be long and I'll have it out. Return to doctor in 2 weeks if all is ok I should be able to get started.
 
Reactions: RaggedGT

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
Apr 24, 2017
#19
  • Apr 24, 2017
  • #19
That must have been scary. Good to hear you're still positive.
 

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
May 17, 2017
#20
  • May 17, 2017
  • #20
might need some injectors and complete wiring harness wiring harness back to computer fried in middle engine harness can you say new distributor Well I have finally started to feel better and the doc says I'm on the mend so today it was 90 degrees here in Pa. so I pushed the stang out into the sunshine and power washed the engine bay.
Started removing the things needed to pull the engine etc. It's not too bad but it's a mess.
 
Reactions: 95BlueStallion, Davedacarpainter, 90sickfox and 2 others
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
254
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
9
1994 Mustang GT 5.0 L Convertible
  • 94ns95
  • Jun 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
179
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 19, 2026
94ns95
9
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
789
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
U
No fuel pump relay in harness
  • Uli661
  • May 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
148
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
Uli661
U
W
Megasquirt base tune for 94 5.0
  • wrx757
  • Mar 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
197
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 6, 2026
wrx757
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?