Update on the 02 Cam Shaft Postion Sensor Drama

Wolfstang79 · Jan 22, 2010

So I replaced the coil packs, even though i had a feeling they wouldn't fix the problem. For those of you who didn't read the last posting, my check engine light is on and the code that i pulled is a "cam shaft position sensor circuit malfunction". I checked the wiring harness and the sensor plug and nothing looks obviously damaged. So now i need help. Any suggestions on where to go from here?

wmburns · Jan 23, 2010

Check for AC ripple. Either test yourself using a VOM on AC scale (report/post) or pull the alternator and take to local autoparts store for a bench test. The bench test will check for a bad rectifier.

If still having problem see post #2 with wiring diagram 24-6. Will be necessrary to Ohm out the wiring harness. However, should start by reading voltage on Cam sensor pin 2 (DB/OG). Post the results (key on/engine off).

http://www.stangnet.com/mustang-forums/805224-engine-light-cam-shaft-positions-sensor.html

Update on the 02 Cam Shaft Postion Sensor Drama

Wolfstang79

New Member

wmburns

Similar threads

Update on the 02 Cam Shaft Postion Sensor Drama

Wolfstang79

New Member

wmburns

Similar threads

Privacy & Transparency

Privacy & Transparency