upr extreme firewall adjuster?

wickdgt · Jul 26, 2004

I just installed upr's tripple hook quadrant and started on the extreme firewall adjuster, the directions tell you to remove the rubber grommet. I removed the rubber grommet but the white plastic piece is in the way. Before i remove that plastic piece and ruin my clutch cable figured ask someone that has installed this before. Thanks for any help.

HISSIN50 · Jul 27, 2004

might get some info from V8 only's article. good luck.

http://www.50stangs.com/techarticles/clutchcableadjustment.html

stangbear427 · Jul 27, 2004

Did you get it yet? As many times as I've done this and as many different cables as I've used I don't remember any white plastic peice being in the way, just the black rubber donut at the firewall end, which comes off. Nothing that would be considered ruining the cable, that's for sure. You want to be left with something that will fit in the FWA, and it should be pretty easy to see before you start pulling it apart. Good choice on parts! You'll be happy with it.

iwashmycar · Jul 27, 2004

I had to remove the donut and file away 4 little bumps so that the plastic piece would fit in the FWA.

wickdgt · Jul 27, 2004

Thanks for the help those 4 little bumps you are talking about are whats in the way. I'll remove those so it will fit. Thanks again.

upr extreme firewall adjuster?

wickdgt

New Member

HISSIN50

"How long does it take to get help in here?

stangbear427

Active Member

iwashmycar

wickdgt

New Member

Similar threads

upr extreme firewall adjuster?

wickdgt

New Member

HISSIN50

"How long does it take to get help in here?

stangbear427

Active Member

iwashmycar

wickdgt

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency