upr Mustang A/C Pump Eliminator w/ Holes?

faststang90

10 Year Member

Nov 5, 2007

522

16

49

baytown texas

Apr 15, 2011

#1

• Apr 15, 2011

• #1

any one have one of them. i have just the alt,water,pump and i added a stock type part to make the belt tighter but the belt is making noise. i dont have any other parts does this just bolt to the motor



86-93 Mustang A/C Pump Eliminator w/ Holes

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Apr 15, 2011

#2

• Apr 15, 2011

• #2

It bolts on the factory bracket in place of your A/C headunit....

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,260

17,945

224

Massachusetts

Apr 17, 2011

#3

• Apr 17, 2011

• #3

You are missing too many parts to use that kit.

Why is the belt making noise? Is it too tight? Is it slipping on a pulley? Is it worn out?

 

Cobra912

Active Member

May 1, 2005

1,777

11

39

Wish I was anywhere but here

Apr 17, 2011

#4

• Apr 17, 2011

• #4

you will never ever get rid of the belt squeal with the routing of the belt as you have it now, there simply is not enough tension on the belt. I had the identical set-up for two years and it drove me nuts! I tried everything! You are using the march a/c eliminator kit, it's a completely useless bracket.

You could move the alternator to the driver's with a breeze kit or change out your water pump, backing plate and timing cover to a standard rotation and ASP grooved pulley.

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Apr 17, 2011

#5

• Apr 17, 2011

• #5

You can also slot the tensioner pin locator and run the belt over the stock tensioner...ran that setup for years works very well