use 96 intake with a 2002 motor

rockyracoon · Jan 21, 2010

I just noticed that the plastic outlet for coolant that comes out of the passenger side rear intake is broken up where the rubber hose begins.they must of broken it when they removed the motor.can I use the older intake?
I see that the intake gaskets for the two motors have a different part number,hence I assume the intakes differ slightly.

trinity_gt · Jan 21, 2010

The difference between NPI and PI intakes is more than "slight." Even if you're able to make it fit without vacuum or coolant leaks, don't saddle PI heads with an NPI intake.

COramprat · Jan 21, 2010

Yeah...you are going backwards. Besides even if you can find an older intake it is likely to crack also. Break down and get a PI intake.

rockyracoon · Jan 21, 2010

I have a PI engine that im in the process of installing,but as stated in the thread, the plastic water outlet is damaged,thats why I was asking about using the intake from my 96.

BTW my 96 intake has the aluminum crossover.

Gearbanger 101 · Jan 21, 2010

Are you willing to give up a solid 25hp? Because that's what you'll be leaving on the table swapping a pre-PI intake, to your PI engine. Spend the $200 on the proper intake and don't look back. This is not an item you want to start cutting corners and saving pennies with.

wmburns · Jan 21, 2010

Let's forget about the HP for a moment. The intake ports on the PI heads are a larger and a different shape. Putting a Non-PI intake on PI heads will leak.

trombonedemon · Jan 21, 2010

, why, just why? I'm as thrifty as they come when comes to looking for a deal on car parts, some things are best left as they were built, move forward, this is something you will regret, don't drive unless its your daily and just save for it and do it right!!!

Mike97gt · Jan 21, 2010

No you can't use a NPI intake on a PI engine. That is a bad idea, do what I did with my aluminum cross NPI find a vic owner that just wants a aluminum crossover and get a PI intake from ford, not doorman.. From FORD

98COBRA281 · Jan 21, 2010

dont use a NPI intake on a PI motor!

if you lived near me, i have a dorman replacment PI intake in my garage id give to you for free..........

Mike97gt · Jan 21, 2010

98COBRA281 said:
dont use a NPI intake on a PI motor!

if you lived near me, i have a dorman replacment PI intake in my garage id give to you for free..........

I have a dorman kicking around too. I wonder how bad those flow compared to a ford PI

98COBRA281 · Jan 22, 2010

svttech76 said:
I have a dorman kicking around too. I wonder how bad those flow compared to a ford PI

when we just took it off my friends car last weekend, and put a ford PI on it, it made a huge difference in power, sound, and make the car run completely different! in a good way!

but its better then nothing in his case...........

Mike97gt · Jan 22, 2010

98COBRA281 said:
when we just took it off my friends car last weekend, and put a ford PI on it, it made a huge difference in power, sound, and make the car run completely different! in a good way!

but its better then nothing in his case...........

Yeah those doorman's suck.. My car had a doorman. now it sits around my house

use 96 intake with a 2002 motor

rockyracoon

trinity_gt

COramprat

...I can take it. I think.

rockyracoon

Gearbanger 101

Straight Outta Locash

wmburns

trombonedemon

Well-Known Member

Mike97gt

it doe snot

98COBRA281

Mike97gt

it doe snot

98COBRA281

Mike97gt

it doe snot

Similar threads

use 96 intake with a 2002 motor

...I can take it. I think.

Straight Outta Locash

Well-Known Member

it doe snot

it doe snot

it doe snot

Similar threads

Privacy & Transparency

Privacy & Transparency