V-8 Fuel Line Routing

[BigDaddyCee]

Trying to install my new fuel line (pre-bent stock fuel line). My previous one was for a 6 cyl and doesn't go up as far as the V-8 line. From the mounting point by the park-brake forward it looks like it is bent to travel on the outside of the frame rail inside the wheel housing and re-enter the engine bay through the fender apron underneath the washer fluid bag? Is this correct? Or can someone set me straight.

 

[pabear89]

Short of passing thru some mounting clips,
Thats where it goes.
the end under the drivers left foot has a rubber fuel line connection to the rear hardline to the tanks rubber conection.

PB

 

[dennis112]

Trying to install my new fuel line (pre-bent stock fuel line). My previous one was for a 6 cyl and doesn't go up as far as the V-8 line. From the mounting point by the park-brake forward it looks like it is bent to travel on the outside of the frame rail inside the wheel housing and re-enter the engine bay through the fender apron underneath the washer fluid bag? Is this correct? Or can someone set me straight.

Agreed, it runs under the frame just before the crossmember and reenters where you mention.

 

[BigDaddyCee]

Thanks guys I will be finishing it off tonite.